Thought I had my Octane setup stable finally, but seems not.
Don't dare upgrade to test versions or later version. Do you know what the problem is? Should I install test version of Octane for cuda 8?
See scene crashing on picture viewer and bug reports below...Tried about 25 times to render this.
Crashing when render to picture viewer
Moderators: ChrisHekman, aoktar
Forum rules
Before posting a bug report, please check the following:
1. That the issue has not already been disclosed
2. That the issue is specific to this plugin, and not Octane in general (Try reproducing it in Standalone)
Bugs related to the Octane Engine itself should be posted into the Standalone Support sub-forum.
All bug reports should include the information below, along with a detailed description of the issue and steps to reproduce it.
A. Operating System, including version (i.e. Win 7, OSX 10.11.2, Ubuntu 14.04, etc.)
B. Graphics Card(s) model (i.e. GTX 580 - 3GB, TITAN, etc.)
C. RAM Capacity (i.e. 6 GB)
D. Nvidia driver version (i.e. 7.50, 7.5.22)
E. OctaneRender Standalone version, if installed (i.e. 2.24.2, 2.23, etc.)
F. OctaneRender plugin version (i.e. v2.25 - 2.21)
G. Host application version, including build number if available (i.e. 3ds Max 2016 Build 18.0)
H. A detailed description of the issue and steps to reproduce it (Include Screenshots or video capture), as well as an example scene if applicable.
I. Copies of the Octane Log window and Console window outputs (full text attached as a file to your post is recommended).
Please note that reports of issues inside existing threads will be ignored/removed, and reports may be closed if the reporter does not respond to subsequent queries in the thread.
Before posting a bug report, please check the following:
1. That the issue has not already been disclosed
2. That the issue is specific to this plugin, and not Octane in general (Try reproducing it in Standalone)
Bugs related to the Octane Engine itself should be posted into the Standalone Support sub-forum.
All bug reports should include the information below, along with a detailed description of the issue and steps to reproduce it.
A. Operating System, including version (i.e. Win 7, OSX 10.11.2, Ubuntu 14.04, etc.)
B. Graphics Card(s) model (i.e. GTX 580 - 3GB, TITAN, etc.)
C. RAM Capacity (i.e. 6 GB)
D. Nvidia driver version (i.e. 7.50, 7.5.22)
E. OctaneRender Standalone version, if installed (i.e. 2.24.2, 2.23, etc.)
F. OctaneRender plugin version (i.e. v2.25 - 2.21)
G. Host application version, including build number if available (i.e. 3ds Max 2016 Build 18.0)
H. A detailed description of the issue and steps to reproduce it (Include Screenshots or video capture), as well as an example scene if applicable.
I. Copies of the Octane Log window and Console window outputs (full text attached as a file to your post is recommended).
Please note that reports of issues inside existing threads will be ignored/removed, and reports may be closed if the reporter does not respond to subsequent queries in the thread.
-
mikeadamwood
- Posts: 165
- Joined: Sat Sep 17, 2016 11:51 am
- Attachments
-
- _BugReport.zip
- (40.6 KiB) Downloaded 215 times
Windows 11 Pro | ASUS Pro WSX80E | AMD Threadripper Pro 5975WX 32-Core | 256GB Micron 8x32GB 3200MHz ECC | 2x PNY RTX6000 ADA
Sorry but hope you don't wanna make me spend all time with estimations? Posting just a bugreport without a detailed information that's mostly not enough. We have some requirements on top. Could you please read this list and post somethings as in heads especially last two?
Octane For Cinema 4D developer / 3d generalist
3930k / 16gb / 780ti + 1070/1080 / psu 1600w / numerous hw
3930k / 16gb / 780ti + 1070/1080 / psu 1600w / numerous hw
-
mikeadamwood
- Posts: 165
- Joined: Sat Sep 17, 2016 11:51 am
Sorry I'm struggling for time, I've tried my best to give all information needed.
A. Windows 10 Home
B. 2x GTX 1080 Hybrids
C. 32gb Corsair Vengeance // x4 2133mhz
D. Nvidia driver version 21.21.13.7866
E. OctaneRender Standalone version 2.05.1
F. OctaneRender plugin version 2.05.1
G. Cinema 4D R18.039
H. Render to picture viewer at 1080p gets to frame 2 then crashes with the 'Application error', its second frame everytime. Tried different drive to see if it was a write error or something, still same crash. I've also tried at 720p and still same crash. HOWEVER When I remove the hair it doesn't crash. Hair dynamics were cached also and still same crash.
I. How do I get log if application crash and Cinema closes? I opened window before rendering and it won't let me save before clicking 'OK' on application crash dialogue.
I hope this is enough information? We need to use hair for an upcoming project and really need to know if we are able to pull it off without problems.
Many thanks.
A. Windows 10 Home
B. 2x GTX 1080 Hybrids
C. 32gb Corsair Vengeance // x4 2133mhz
D. Nvidia driver version 21.21.13.7866
E. OctaneRender Standalone version 2.05.1
F. OctaneRender plugin version 2.05.1
G. Cinema 4D R18.039
H. Render to picture viewer at 1080p gets to frame 2 then crashes with the 'Application error', its second frame everytime. Tried different drive to see if it was a write error or something, still same crash. I've also tried at 720p and still same crash. HOWEVER When I remove the hair it doesn't crash. Hair dynamics were cached also and still same crash.
I. How do I get log if application crash and Cinema closes? I opened window before rendering and it won't let me save before clicking 'OK' on application crash dialogue.
I hope this is enough information? We need to use hair for an upcoming project and really need to know if we are able to pull it off without problems.
Many thanks.
- Attachments
-
-
-
- _BugReport.zip
- (41.34 KiB) Downloaded 217 times
Windows 11 Pro | ASUS Pro WSX80E | AMD Threadripper Pro 5975WX 32-Core | 256GB Micron 8x32GB 3200MHz ECC | 2x PNY RTX6000 ADA
Did you tried on 3.05.3 and 3.06-test4? Have you disabled "Hair Render" option in settings? Please send a scene if still happen after these.
Octane For Cinema 4D developer / 3d generalist
3930k / 16gb / 780ti + 1070/1080 / psu 1600w / numerous hw
3930k / 16gb / 780ti + 1070/1080 / psu 1600w / numerous hw
-
mikeadamwood
- Posts: 165
- Joined: Sat Sep 17, 2016 11:51 am
Yes just tried installing latest test version and standalone. I also disabled standard hair in render settings, still get the crash after frame 1.
Would be great if you know whats happening so I've attached the scene file.
Edit: Sorry had to delete hair cache before uploading as it was 1gb, thats the only difference between my file and uploaded one
Would be great if you know whats happening so I've attached the scene file.
Edit: Sorry had to delete hair cache before uploading as it was 1gb, thats the only difference between my file and uploaded one
- Attachments
-
- MoCap Hair.rar
- (28 MiB) Downloaded 218 times
Windows 11 Pro | ASUS Pro WSX80E | AMD Threadripper Pro 5975WX 32-Core | 256GB Micron 8x32GB 3200MHz ECC | 2x PNY RTX6000 ADA
Thanks! It's crashing on me too. I'll investigate and let you know result.
Octane For Cinema 4D developer / 3d generalist
3930k / 16gb / 780ti + 1070/1080 / psu 1600w / numerous hw
3930k / 16gb / 780ti + 1070/1080 / psu 1600w / numerous hw
Ok found the reason see picture. It's not fixable soon. Keep to use it as in notes. And you don't need to put object tag for hairs by default.aoktar wrote:Thanks! It's crashing on me too. I'll investigate and let you know result.
- Attachments
-
Octane For Cinema 4D developer / 3d generalist
3930k / 16gb / 780ti + 1070/1080 / psu 1600w / numerous hw
3930k / 16gb / 780ti + 1070/1080 / psu 1600w / numerous hw
-
mikeadamwood
- Posts: 165
- Joined: Sat Sep 17, 2016 11:51 am
Sorry for late reply was away yesterday.
Thanks for the support will repost when I get back to my machine and try your solution.
Thanks.
Thanks for the support will repost when I get back to my machine and try your solution.
Thanks.
Windows 11 Pro | ASUS Pro WSX80E | AMD Threadripper Pro 5975WX 32-Core | 256GB Micron 8x32GB 3200MHz ECC | 2x PNY RTX6000 ADA
-
mikeadamwood
- Posts: 165
- Joined: Sat Sep 17, 2016 11:51 am
Just got home and tried it, works!aoktar wrote:Ok found the reason see picture. It's not fixable soon. Keep to use it as in notes. And you don't need to put object tag for hairs by default.aoktar wrote:Thanks! It's crashing on me too. I'll investigate and let you know result.
Windows 11 Pro | ASUS Pro WSX80E | AMD Threadripper Pro 5975WX 32-Core | 256GB Micron 8x32GB 3200MHz ECC | 2x PNY RTX6000 ADA