Daz3d Victoria 5 Bree Elite textures
Forum rules
Important notice: All artwork submitted on our public gallery forums gallery forums may or may not be used by OTOY for publication on our website gallery.
If you do not want us to publish your art, please mention it in your post clearly. (put a very red small diagonal cross in the top left corner of the image)
Any images already published on the gallery will be removed if the original author asks us to do so.
We recommend placing your credits on the images so you benefit from the exposure too, and use a minimum image width of 1200 pixels, and pathtracing or PMC. Thanks for your attention, The OctaneRender Team.
For new users: this forum is moderated. Your first post will appear only after it has been reviewed by a moderator, so it will not show up immediately.
This is necessary to avoid this forum being flooded by spam.
Important notice: All artwork submitted on our public gallery forums gallery forums may or may not be used by OTOY for publication on our website gallery.
If you do not want us to publish your art, please mention it in your post clearly. (put a very red small diagonal cross in the top left corner of the image)
Any images already published on the gallery will be removed if the original author asks us to do so.
We recommend placing your credits on the images so you benefit from the exposure too, and use a minimum image width of 1200 pixels, and pathtracing or PMC. Thanks for your attention, The OctaneRender Team.
For new users: this forum is moderated. Your first post will appear only after it has been reviewed by a moderator, so it will not show up immediately.
This is necessary to avoid this forum being flooded by spam.
-
p3taoctane
- Posts: 1418
- Joined: Mon Jan 25, 2010 12:53 am
Very nice. Clean simple, not overly suggestive. Best skin from med range I have seen so far. Well done indeed. Would love to see your settings if you have a moment to share.
Windows 7 Pro_SP 1_64 bit_48 GB Ram_Intel Xeon X5660 2.80 GHZ x2_6 580GTX_1 Quadra 4800
Wow.. may i ask how do you get DAZ studio to work with Octane?
Thanks.
Thanks.
1) I'm having problem exporting maps from Daz Studio. Most of the time it only exports diffuse. I use the export settings as per Octane manual. Anyone knows what did I do wrong?Isotemod wrote:Bit of a struggle to take advantage of SSS this is my first try.
2) Do you mind sharing your octane settings to get the effects you have in the pic?
Thanks//
GTX 560 2GB, AMD FX 8350, 8GB RAM, Win7 x64
I export from Daz Studio as a .obj.
The settings in the Octane manual are correct except for the scale which must be set to 1% Daz scale is 1 unit=1cm octane scale is 1 unit=1m If you get the scale wrong lighting will not work as intended scale is very important in octane.
Generally the .obj will allow for difuse, bump and Opacity but its dependant on the materials being in the right spots in the surface settings. For this reason you may need to manually find the textures that don't export properly.
As to settings Diffuse is fine at 1 but both specular and bump need to be set based on the map but generally bump should be very low .020 is not uncommon. Specular and roughness is according to taste and again varies if your using a specular map.
Ive not found settings for the SSS in Octane that im happy with but using a mix material 1 glossy 1 diffuse with a SSS map in the transmission channel for the Diffuse is a good start but the effects tend to be subtle.
By creating material macros for the main surface groups Face, Torso and Limbs you can save 1 of these as a template and altrering material macros is quicker than altering each individual surface.
If you have any other specific questions feel free to ask.
The settings in the Octane manual are correct except for the scale which must be set to 1% Daz scale is 1 unit=1cm octane scale is 1 unit=1m If you get the scale wrong lighting will not work as intended scale is very important in octane.
Generally the .obj will allow for difuse, bump and Opacity but its dependant on the materials being in the right spots in the surface settings. For this reason you may need to manually find the textures that don't export properly.
As to settings Diffuse is fine at 1 but both specular and bump need to be set based on the map but generally bump should be very low .020 is not uncommon. Specular and roughness is according to taste and again varies if your using a specular map.
Ive not found settings for the SSS in Octane that im happy with but using a mix material 1 glossy 1 diffuse with a SSS map in the transmission channel for the Diffuse is a good start but the effects tend to be subtle.
By creating material macros for the main surface groups Face, Torso and Limbs you can save 1 of these as a template and altrering material macros is quicker than altering each individual surface.
If you have any other specific questions feel free to ask.
Removed at OP request
Last edited by Tugpsx on Mon Nov 14, 2011 4:48 am, edited 2 times in total.
Win 11 64GB | NVIDIA RTX3060 12GB
