Hey Guys,
I decided to do another creative thing this week and I made a desktop image for a client of mine to give away on their facebook and twitter sites.
Pretty basic just, their icon, an emitter plane below that, a flat plane below using a photo for bump mapping that has rivets and bolts, etc..., and 3 lite panels emitting Red, Green, and Blue.
enjoy
Client Logo based Desktop
Forum rules
Important notice: All artwork submitted on our public gallery forums gallery forums may or may not be used by OTOY for publication on our website gallery.
If you do not want us to publish your art, please mention it in your post clearly. (put a very red small diagonal cross in the top left corner of the image)
Any images already published on the gallery will be removed if the original author asks us to do so.
We recommend placing your credits on the images so you benefit from the exposure too, and use a minimum image width of 1200 pixels, and pathtracing or PMC. Thanks for your attention, The OctaneRender Team.
For new users: this forum is moderated. Your first post will appear only after it has been reviewed by a moderator, so it will not show up immediately.
This is necessary to avoid this forum being flooded by spam.
Important notice: All artwork submitted on our public gallery forums gallery forums may or may not be used by OTOY for publication on our website gallery.
If you do not want us to publish your art, please mention it in your post clearly. (put a very red small diagonal cross in the top left corner of the image)
Any images already published on the gallery will be removed if the original author asks us to do so.
We recommend placing your credits on the images so you benefit from the exposure too, and use a minimum image width of 1200 pixels, and pathtracing or PMC. Thanks for your attention, The OctaneRender Team.
For new users: this forum is moderated. Your first post will appear only after it has been reviewed by a moderator, so it will not show up immediately.
This is necessary to avoid this forum being flooded by spam.
The icon needs more subdivisions. 
I don't really like it as much with the sub surf applied, but I played arond with it a bit, and ot something that wasn't all bad. here's with some manual curve manipulation and a subsurf.
- Attachments
-
CPU - i7-950 3.06 Ghz, 24GB Ram, Win7 x64, 2 display monitors, GeForce GTX 580 3GB Classified. I'm glad to say I LOVE OCTANE!
-
AndreaMannori
- Posts: 153
- Joined: Thu Feb 24, 2011 8:25 am
- Location: Bergamo
A little bit more of light and a cool Bloom effect would be perfect.
BTW nice logo!
Cheers
BTW nice logo!
Cheers
Andrea Mannori
win 8.1 x64; nvidia 770M driver 340.52; octane standalone 2 + c4doctane 2.
win 8.1 x64; nvidia 770M driver 340.52; octane standalone 2 + c4doctane 2.
imo you need to add some more loopcuts to get rid of that "smooth" behaviour on the top and get back that "flat" shading. maybe you first need to change the mesh topology or maybe better: create the logo out of extruded curves and raise the render resolution of the curve until all visible edges are gone.
- Mint 10 64bit nvidia drv 260.19.29/cudatoolkit3.0 intel q6600, 4gbRAM, GTX470 1,2GB
- Mint 10 64bit/ Win7 64bit nvidia drv 260.19.29/cudatoolkit3.2 amd X6, 16gbRAM, 2x GTX580 3GB
->Octane 2.44/ Blender2.5x
- Mint 10 64bit/ Win7 64bit nvidia drv 260.19.29/cudatoolkit3.2 amd X6, 16gbRAM, 2x GTX580 3GB
->Octane 2.44/ Blender2.5x