Dof problem with Octane 3

[marchermitte]

Hello!
I'm playing with a scene and I can't get the dof to work ... I do what I always do , use a distance from / to, item info on the caméra and a focus null object but now nothing seem to work. I pushed the aperture far (50 , 100), nothing.
I also tried without the distance to nodes setup, plain octane aperture, nothing. It seemed to work in the beginning and then, no more.
Anybody else?

thank you

[juanjgon]

I suppose that you don't have the autofocus option enabled, right? Can you send to me the .lws scene file?

-Juanjo

[marchermitte]

No Autofocus... I did try (because It wasn't working with my rig, the exact same that worked with Octane2.x ) to enable It , pick the focus in the IPR but still nothing.

https://drive.google.com/file/d/0Bz71I8 ... sp=sharing

Thank you!

[juanjgon]

The problem is that you have the "Aperture edge" parameter set to 0.0. If you set it to 1.0 all should work fine

-Juanjo

[marchermitte]

Ok, I had changed It before without noticeable changes BUT to see the result I have now to crank up the aperture to 50 or a 100! Not sure if It's due to my scene scale or to the changes since Octane 2.
It works now, thank you!

[LightwaveGuru]

Ok, I had changed It before without noticeable changes BUT to see the result I have now to crank up the aperture to 50 or a 100! Not sure if It's due to my scene scale or to the changes since Octane 2.
It works now, thank you!

its your scene size...

snip lwguru