ME109vsP51 - Octane Sketch of an engagement

Discuss or ask critique about your current works
Forum rules
Important notice: All artwork submitted on our public gallery forums gallery forums may or may not be used by OTOY for publication on our website gallery.
If you do not want us to publish your art, please mention it in your post clearly. (put a very red small diagonal cross in the left right corner of the image)
Any images already published on the gallery will be removed if the original author asks us to do so.
We recommend placing your credits on the images so you benefit from the exposure too, and use a minimum image width of 1200 pixels, and use pathtracing or PMC. Thanks for your attention, The OctaneRender Team.


For new users: this forum is moderated. Your first post will appear only after it has been reviewed by a moderator, so it will not show up immediately.

This is necessary to avoid this forum being flooded by spam.
Post Reply
solrok
Licensed Customer
Posts: 17
Joined: Mon Nov 22, 2010 9:27 pm
Location: Los Angeles, CA
Contact:

This was all rendered as 2K - 2560x1080. Was looking at anamorphic sizing and this fits with RED and is bigger than Panavision.

Starts with check down of materials and lighting, camera.
Work scene up a little with mountains and p51.

No Post or Effects just Octane and working with the camera and settings.

Gamma is unified to 2.2
Linear is On

All look and effects are achieved in Octane.

http://vimeo.com/21674140
Attachments
me109_0sm.mov
(6.2 MiB) Downloaded 2000 times
Win 7 64bit Pro | 3.06 950 i7 | 24GB RAM | 256 GB SSD boot | 256GB and 120GB SSD for cache| 12TB RAID 0 Adaptec 6405E | TANGENT WAVE PANEL | Quadro 600 (display), 1-580GTX-1.5GB
Post Reply

Return to “Works In Progress”