problem when unzip to folder.

Forums: problem when unzip to folder.
SketchUp Integrated Plugin (Integrated Plugin maintained by OTOY)

problem when unzip to folder.

Postby nipparnlert » Sat Jan 22, 2011 3:53 pm

nipparnlert Sat Jan 22, 2011 3:53 pm
Problem, try to unzip and copy to plugin folder but not work.
Attachments
02.jpg
01.jpg
new user :
Hardware : win7-x64 / i7-930-2.8 / ASUS P6T / PCI Express x16 Gen2 / DDR3 G.Skill 6GB. / Inno Geforce GTX470 CUDA Cores 448 / CoolerMaster / GX-750
Software : Octanerender pre-Beta 2.42 / Sketchup8 / Nvidia Driver 260.99 / CUDA 3.2.1
User avatar
nipparnlert
Licensed Customer
Licensed Customer
 
Posts: 75
Joined: Fri Jun 18, 2010 3:59 pm
Location: Thailand

Re: problem when unzip to folder.

Postby TIG » Sat Jan 22, 2011 6:29 pm

TIG Sat Jan 22, 2011 6:29 pm
Here's what I'd do...

Download the zip file to the Desktop.
You must have full rights to that folder.
Select the zip file and extract it's full contents to a folder named after the zip file - that's the default for most zip/unzip apps.
Check the extracted files are in the same subfolders as listed in the zip itself.
There should only be a limited number of files in the base folder [.rb loader files etc]
A good zip/unzip app should keep them in the correct locations, so it should be OK.
Now 'select all' and right-click 'copy'.
Open the ../Sketchup../Plugins/ folder and right-click 'paste' to copy all of the files and files_inside_subfolders into the ../Plugins/ folder...
If not an 'admin' and/or there aren't appropriate access rights set you will be prompted for actions - 'Yes' to do the copy... and overwrite all preexisting files and merge preexisting folders and overwrite their contents as prompted.
Once all has been copied over remove the folder from your Desktop, and then file the downloaded zip file away somewhere safe for future reference if it is ever needed.
It's a good idea to have the folders within the Sketchup folder set with appropriate access rights - right-click Preferences > Security - users and admins should have 'full rights' to let them easily add/remove scripts to the Plugins, Styles, Components and Materials folders etc... Sometimes a standard install into the 'Program Files' folder gives limited rights to 'users' and that leads to this type of problem... :roll:

Regarding the Octane Render Binary being invalid...
You must enter the path [can select from the file browser] to a proper c:\...\octane.exe file that exists [slightly different on a MAC ?] - e.g. on a PC it might be
C:\Program Files\Refractive Software\OctaneRender_COM_1022_beta22_RC3_win_32\octane.exe
???
TIG
User avatar
TIG
Licensed Customer
Licensed Customer
 
Posts: 536
Joined: Wed May 12, 2010 1:25 pm

Re: problem when unzip to folder.

Postby nipparnlert » Sun Jan 23, 2011 2:19 am

nipparnlert Sun Jan 23, 2011 2:19 am
TIG wrote:Regarding the Octane Render Binary being invalid...
You must enter the path [can select from the file browser] to a proper c:\...\octane.exe file that exists [slightly different on a MAC ?] - e.g. on a PC it might be
C:\Program Files\Refractive Software\OctaneRender_COM_1022_beta22_RC3_win_32\octane.exe
???


Thanks, TIG

I just uninstall 1022 beta and used only 24.2 cuda 3.2 for x64. Do i have to reinstall 1022?
new user :
Hardware : win7-x64 / i7-930-2.8 / ASUS P6T / PCI Express x16 Gen2 / DDR3 G.Skill 6GB. / Inno Geforce GTX470 CUDA Cores 448 / CoolerMaster / GX-750
Software : Octanerender pre-Beta 2.42 / Sketchup8 / Nvidia Driver 260.99 / CUDA 3.2.1
User avatar
nipparnlert
Licensed Customer
Licensed Customer
 
Posts: 75
Joined: Fri Jun 18, 2010 3:59 pm
Location: Thailand

Re: problem when unzip to folder.

Postby TIG » Sun Jan 23, 2011 9:14 pm

TIG Sun Jan 23, 2011 9:14 pm
Simply set the 'binary' to a valid .exe file ???
TIG
User avatar
TIG
Licensed Customer
Licensed Customer
 
Posts: 536
Joined: Wed May 12, 2010 1:25 pm

Return to SketchUp


Who is online

Users browsing this forum: No registered users and 1 guest

Fri Oct 23, 2020 12:27 pm [ UTC ]