I get this in the Console…
<<< Render failure detected!!! >>>
Please check render statistics to solve the problem.
Check geometry subdivisons.
Picture viewer uses 'Render' subdivisions. But Live Viewer uses 'Editor' subdivision values.
Try to decrease 'render/editor' subdivison values.
LVL:0 85 2
LVL:0 85 2
copyDenoisedBeauty:1 needDenoising:0
beautyDenoiser progress:inf
OCT:not all the passes requested for tonemapping are enabled
Break rendering...
copyDenoisedBeauty:1 needDenoising:0
beautyDenoiser progress:inf
OCT:not all the passes requested for tonemapping are enabled
**** RENDER FINISHED **** stat=6
The same scene renders fine without denoising turned on. I hope this can be fixed quickly, because Octane in C4D feels rock solid now!
OctaneX PR7 denoising/tonemapping issue
Moderators: ChrisHekman, aoktar
Forum rules
Before posting a bug report, please check the following:
1. That the issue has not already been disclosed
2. That the issue is specific to this plugin, and not Octane in general (Try reproducing it in Standalone)
Bugs related to the Octane Engine itself should be posted into the Standalone Support sub-forum.
All bug reports should include the information below, along with a detailed description of the issue and steps to reproduce it.
A. Operating System, including version (i.e. Win 7, OSX 10.11.2, Ubuntu 14.04, etc.)
B. Graphics Card(s) model (i.e. GTX 580 - 3GB, TITAN, etc.)
C. RAM Capacity (i.e. 6 GB)
D. Nvidia driver version (i.e. 7.50, 7.5.22)
E. OctaneRender Standalone version, if installed (i.e. 2.24.2, 2.23, etc.)
F. OctaneRender plugin version (i.e. v2.25 - 2.21)
G. Host application version, including build number if available (i.e. 3ds Max 2016 Build 18.0)
H. A detailed description of the issue and steps to reproduce it (Include Screenshots or video capture), as well as an example scene if applicable.
I. Copies of the Octane Log window and Console window outputs (full text attached as a file to your post is recommended).
Please note that reports of issues inside existing threads will be ignored/removed, and reports may be closed if the reporter does not respond to subsequent queries in the thread.
Before posting a bug report, please check the following:
1. That the issue has not already been disclosed
2. That the issue is specific to this plugin, and not Octane in general (Try reproducing it in Standalone)
Bugs related to the Octane Engine itself should be posted into the Standalone Support sub-forum.
All bug reports should include the information below, along with a detailed description of the issue and steps to reproduce it.
A. Operating System, including version (i.e. Win 7, OSX 10.11.2, Ubuntu 14.04, etc.)
B. Graphics Card(s) model (i.e. GTX 580 - 3GB, TITAN, etc.)
C. RAM Capacity (i.e. 6 GB)
D. Nvidia driver version (i.e. 7.50, 7.5.22)
E. OctaneRender Standalone version, if installed (i.e. 2.24.2, 2.23, etc.)
F. OctaneRender plugin version (i.e. v2.25 - 2.21)
G. Host application version, including build number if available (i.e. 3ds Max 2016 Build 18.0)
H. A detailed description of the issue and steps to reproduce it (Include Screenshots or video capture), as well as an example scene if applicable.
I. Copies of the Octane Log window and Console window outputs (full text attached as a file to your post is recommended).
Please note that reports of issues inside existing threads will be ignored/removed, and reports may be closed if the reporter does not respond to subsequent queries in the thread.
Hi,
please, open the scene, then go to c4doctane Settings/Other tab, and, at the bottom of the panel, enable all the Log option checkboxes.
Then, load the scene in Live View, then in Picture Viewer, until error message, then reopen c4d, navigate to c4doctane Settings/Other tab, press the Generate log report button, and share the octanelog_report.zip file, thanks.
Please also go to c4doctane settings/devices tab, press the Device Setting button, and share a screenshot of both panels, thanks.
ciao Beppe
please, open the scene, then go to c4doctane Settings/Other tab, and, at the bottom of the panel, enable all the Log option checkboxes.
Then, load the scene in Live View, then in Picture Viewer, until error message, then reopen c4d, navigate to c4doctane Settings/Other tab, press the Generate log report button, and share the octanelog_report.zip file, thanks.
Please also go to c4doctane settings/devices tab, press the Device Setting button, and share a screenshot of both panels, thanks.
ciao Beppe
This particular scene I was mucking about with OpenVDB explosions. Without denoise on, it rendered fine with no problem (including image sequence to the Picture Viewer).
As soon as I turn on denoising, I get 'Render Failure'. Restarting the LV actually worked, but it then failed to render to the PV – I just get a black screen and render failure.
Here are the settings and the log…
As soon as I turn on denoising, I get 'Render Failure'. Restarting the LV actually worked, but it then failed to render to the PV – I just get a black screen and render failure.
Here are the settings and the log…
These kind of issues are not related with plugin side. Please share a project with assets for C4D or ORBX if it still happen in standalone. Or C4D project.
Octane For Cinema 4D developer / 3d generalist
3930k / 16gb / 780ti + 1070/1080 / psu 1600w / numerous hw
3930k / 16gb / 780ti + 1070/1080 / psu 1600w / numerous hw
Right, did a few tests and this is related to my previous issue of rendering a sequence to the Picture Viewer. I can render a sequence fine if there's no Denoise turned on. But if I turn it on, it only renders the first frame then just keeps 'preparing'. I assume it can't trigger the Denosie function and so it goes into an infinite loop of preparing. It's got to be a plugin issue (what else could it be when I'm rendering a cube!?) and It's totally repeatable.
It's not a plugin related but keep posted. You're using 2020.1.5 plugin's core for OX.Weezer wrote:It must be the plugin: here is a cube on a disc, an Octane Sky and a camera. The moment I enable Denoise in the Camera Tag, I get this…
Octane For Cinema 4D developer / 3d generalist
3930k / 16gb / 780ti + 1070/1080 / psu 1600w / numerous hw
3930k / 16gb / 780ti + 1070/1080 / psu 1600w / numerous hw
I mean it should a core issue. First we should reproduce it here to report itWeezer wrote:Sorry, what do you mean? I'm using the Studio version of Octane PR7. Will these issues be resolved with the new core?
Octane For Cinema 4D developer / 3d generalist
3930k / 16gb / 780ti + 1070/1080 / psu 1600w / numerous hw
3930k / 16gb / 780ti + 1070/1080 / psu 1600w / numerous hw