hi all
just wanted to share a small project WIP.
i just ordered a 3d printer and this is the sketch for the first project (as soon as the printer shows up).
the printed parts will be the robot. hopefully i can print it with a iron filament so i can get the rusted look.
comments and crit are welcome
Sketch for 3d print
Forum rules
Important notice: All artwork submitted on our public gallery forums gallery forums may or may not be used by OTOY for publication on our website gallery.
If you do not want us to publish your art, please mention it in your post clearly. (put a very red small diagonal cross in the top left corner of the image)
Any images already published on the gallery will be removed if the original author asks us to do so.
We recommend placing your credits on the images so you benefit from the exposure too, and use a minimum image width of 1200 pixels, and pathtracing or PMC. Thanks for your attention, The OctaneRender Team.
For new users: this forum is moderated. Your first post will appear only after it has been reviewed by a moderator, so it will not show up immediately.
This is necessary to avoid this forum being flooded by spam.
Important notice: All artwork submitted on our public gallery forums gallery forums may or may not be used by OTOY for publication on our website gallery.
If you do not want us to publish your art, please mention it in your post clearly. (put a very red small diagonal cross in the top left corner of the image)
Any images already published on the gallery will be removed if the original author asks us to do so.
We recommend placing your credits on the images so you benefit from the exposure too, and use a minimum image width of 1200 pixels, and pathtracing or PMC. Thanks for your attention, The OctaneRender Team.
For new users: this forum is moderated. Your first post will appear only after it has been reviewed by a moderator, so it will not show up immediately.
This is necessary to avoid this forum being flooded by spam.
-
danForsgren
- Posts: 5
- Joined: Sun Mar 31, 2013 4:22 pm
- Location: gothenburg sweden
- Contact:
- Attachments
-
-
-
daniel forsgren - design - animation
http://www.danielforsgren.com
http://www.danielforsgren.com
wow man, it's awesome lookin' piece ;) please post when You have 3dprinted model as well =)
That is very cool. 
If you can't get it made with iron filament, you can use a product by Triangle Crafts called Sophisticated Finishes. They have a "Iron Metallic Surfacer" that is a polyacrylate paint and goes on looking grey and it will rust. They also have a solution called "Rust Antiquing Solution" which allows better control on where the rust happens. It gets very realistic results, but you will have to seal it so it doesn't keep rusting.
Jason
If you can't get it made with iron filament, you can use a product by Triangle Crafts called Sophisticated Finishes. They have a "Iron Metallic Surfacer" that is a polyacrylate paint and goes on looking grey and it will rust. They also have a solution called "Rust Antiquing Solution" which allows better control on where the rust happens. It gets very realistic results, but you will have to seal it so it doesn't keep rusting. Jason
Linux Mint 21.3 x64 | Nvidia GTX 980 4GB (displays) RTX 2070 8GB| Intel I7 5820K 3.8 Ghz | 32Gb Memory | Nvidia Driver 535.171
-
ankit.patwa
- Posts: 2
- Joined: Thu Mar 09, 2017 3:07 pm
- Contact:
this is an amazing render
-
danForsgren
- Posts: 5
- Joined: Sun Mar 31, 2013 4:22 pm
- Location: gothenburg sweden
- Contact:
finally i got my PRUSA I3 printer and manage to print and assemble the lamp sketch
pretty happy with the result. looks petty similar to the sketch render.
/d
pretty happy with the result. looks petty similar to the sketch render.
/d
- Attachments
-
-
-
-
daniel forsgren - design - animation
http://www.danielforsgren.com
http://www.danielforsgren.com
really nice !!!!
too bad that the lamp cap is not made in metal
too bad that the lamp cap is not made in metal
YOKO Studio | win 10 64 | i7 5930K GTX 3090 | 3dsmax 2022.3 |
Neat! Looks really cool
You know, sometimes (more often than not) sketch or 3D render looks way better than original..& when You finally see the piece..it's somehow doesn't meet what You were expecting. But not this time!
Render itself was awesome, but end result is even better! ;) I don't usually like those small things that gather dust..but this one is really awesome piece!
Mind sharing how long it took for You to design it, were there any troubles with metal printing..after all what were the total cost (well I guess You were not counting Your time, so just include that as well).
Render itself was awesome, but end result is even better! ;) I don't usually like those small things that gather dust..but this one is really awesome piece!
Mind sharing how long it took for You to design it, were there any troubles with metal printing..after all what were the total cost (well I guess You were not counting Your time, so just include that as well).
I was surprised to see that 3D printers can be ale to produced such things too.Perfect!
That is really cool ! Splendid model and render. The actual 3D printed lamp also looks great !
Windows 10 Pro i9-9980XE 128GB RAM|4 x Titan RTX
Houdini 18.5(2020.2.1.2)|Cinema C4D R26|Daz Studio Pro 4.21.0.5(Octane 2021.1.6.83)
NVIDIA 460.89 Studio Standard
Houdini 18.5(2020.2.1.2)|Cinema C4D R26|Daz Studio Pro 4.21.0.5(Octane 2021.1.6.83)
NVIDIA 460.89 Studio Standard