motherboard for optimal performance graphics cards
Forum rules
Please add your OS and Hardware Configuration in your signature, it makes it easier for us to help you analyze problems. Example: Win 7 64 | Geforce GTX680 | i7 3770 | 16GB
Please add your OS and Hardware Configuration in your signature, it makes it easier for us to help you analyze problems. Example: Win 7 64 | Geforce GTX680 | i7 3770 | 16GB
yes - definitely x99 if m.2 is considered which uses some pcie lanes. Read a manual for pcie performance for any board before you buy it.
3090, Titan, Quadro, Xeon Scalable Supermicro, 768GB RAM; Sketchup Pro, Classical Architecture.
Custom alloy powder coated laser cut cases, Autodesk metal-sheet 3D modelling.
build-log http://render.otoy.com/forum/viewtopic.php?f=9&t=42540
Custom alloy powder coated laser cut cases, Autodesk metal-sheet 3D modelling.
build-log http://render.otoy.com/forum/viewtopic.php?f=9&t=42540
It all depends what you use for connecting 7 gpus - quality of risers, their length, 40pcie cpu 5930k min.,
3090, Titan, Quadro, Xeon Scalable Supermicro, 768GB RAM; Sketchup Pro, Classical Architecture.
Custom alloy powder coated laser cut cases, Autodesk metal-sheet 3D modelling.
build-log http://render.otoy.com/forum/viewtopic.php?f=9&t=42540
Custom alloy powder coated laser cut cases, Autodesk metal-sheet 3D modelling.
build-log http://render.otoy.com/forum/viewtopic.php?f=9&t=42540
Goldisart wrote:ASUS-Russia confirmed official support for 7 graphics cards in single mode
ASUS X99-E WS
..
recommend this motherboard ASUS X99-E WS
I would be so sure even with quality risers..- jsut been contacted by one Guy that has problem to boot with more than 5GPUs - tested some of the best risers around (3M), still no luck.. though He haven't activated 4G yet..let's ask How he's doing right now =) I'll be back asap!smicha wrote:It all depends what you use for connecting 7 gpus - quality of risers, their length, 40pcie cpu 5930k min.,
Thanks Tom.
3090, Titan, Quadro, Xeon Scalable Supermicro, 768GB RAM; Sketchup Pro, Classical Architecture.
Custom alloy powder coated laser cut cases, Autodesk metal-sheet 3D modelling.
build-log http://render.otoy.com/forum/viewtopic.php?f=9&t=42540
Custom alloy powder coated laser cut cases, Autodesk metal-sheet 3D modelling.
build-log http://render.otoy.com/forum/viewtopic.php?f=9&t=42540
I'm already two years using PCI-Express Riser = to three graphics cards . . . no problems I do not watch. The positive side is that the graphics card is not heated above 75 degrees Celsius... I also have doubts that all 7 cards will be determined this motherboard.
any riser, extender, etc..is another point to fail (& I'm not the only who mentions that)..as it sits in the path of signal. But, I don't mean to say using them is bad =)Goldisart wrote:I'm already two years using PCI-Express Riser = to three graphics cards . . . no problems I do not watch. The positive side is that the graphics card is not heated above 75 degrees Celsius... I also have doubts that all 7 cards will be determined this motherboard.
positive side is ok as far as it works..when it will stop..have in mind where it could fail =) & test those things..as some pull the hair of from trying to solve stability issues..
I'm not to say that motherboard would not work..as I know multiple systems based on that mob that work with four, even dual GPU cards like titanZ, but.. I Also know users who can not boot with seven cards, other can't boot with more than 5 cards.. - noOne knows for sure why. Different units were tested, boards RMAed, etc..- treat this information as You wish.