Home-Office Interior

Wed Jul 15, 2015 5:42 am

Hi everybody,
a new interior scene render has just finished. so close to finish so did not post under wip. Hope you like. Any c&c are welcome. Thanks for watching.

Kernel:PT 1000samples
Resolution : 2K
Render time : 7 min. with Titan+780

Wed Jul 15, 2015 6:37 am

Seems good lighted scene.
Can you tell more about the setup for lighting (daylight, hdr, ...) ?
Is it a closed room or did you leave the wall on camera side to get light inside?

The painting between the windows seems a little forced/crowded to me.

Greetz,

Wed Jul 15, 2015 7:32 am

Very nice, and pretty clean for 1000 samples only.

Wed Jul 15, 2015 9:14 am

Thank you very much guys.
Rappet, i used an hdri and a window sized area light on the right side, shadow visibility off. as you mentioned there is a big hole behind the camera. Eventhough i do not like this method bcos of unrealistic lighting and reflections, there is no any other way to get rid of render times that takes ages.
actually i am not happy with the painting on the wall, would be pleasure if you have an idea:)
Cheers Hüseyin

Wed Jul 15, 2015 9:28 am

sadece wrote:Thank you very much guys.
Rappet, i used an hdri and a window sized area light on the right side, shadow visibility off. as you mentioned there is a big hole behind the camera. Eventhough i do not like this method bcos of unrealistic lighting and reflections, there is no any other way to get rid of render times that takes ages.
actually i am not happy with the painting on the wall, would be pleasure if you have an idea:)
Cheers Hüseyin

Hi Sadece,

Thanx for sharing.
I would move the painting to the right and hang it above the cabin (smaller size).

cheers,

Thu Jul 16, 2015 9:24 am

Hi Rappet thanks for the feedback.

Fri Jul 17, 2015 12:13 pm

Looks great.

Small question - Looks like the sofas shadows are a bit off. Ary you sure you ray epsilon value is correct related to scene scale?

Fri Jul 17, 2015 9:59 pm

Hi Yambo.Thank you
i do always work in real dimensions in cm. And do not change ray epsilon value since i m happy with the default value that is 0.0001 i guess. I am far away from computer and cant check it out atm but sure it is default.

Sat Jul 18, 2015 4:06 am

Looks like a good scene to test this ray epsilon shadow isuue i've noticed. If you like - please add zero, subtract a zero and send some renders to see if you get better shadow results for the sofas legs. It had better results for inerior in real world scale for scenes that the legs of the furnitore are very thin like those.

Sat Jul 18, 2015 10:11 am

Yambo, i've just done render with the value of 0 (the field doesnt get the exact Zero but the lowest as possible) and here is the result.
PS.Conherit ratio = 0