I recently bought Octane and i started my first project with octane. I'm using a GTS 250 atm, 512 MB. Decent but i feel the need to upgrade to a GPU with at least 1 GB so an upgrade will come in near future.
I started this project for the june still competition, i'm still texturing the pot, the rims and foot still have no wear and tear etc.. This is just a render i did with my progress so far. I hope you like it.
WIP june still contest : First attempt at Octane
Forum rules
Important notice: All artwork submitted on our public gallery forums gallery forums may or may not be used by OTOY for publication on our website gallery.
If you do not want us to publish your art, please mention it in your post clearly. (put a very red small diagonal cross in the left right corner of the image)
Any images already published on the gallery will be removed if the original author asks us to do so.
We recommend placing your credits on the images so you benefit from the exposure too, and use a minimum image width of 1200 pixels, and use pathtracing or PMC. Thanks for your attention, The OctaneRender Team.
For new users: this forum is moderated. Your first post will appear only after it has been reviewed by a moderator, so it will not show up immediately.
This is necessary to avoid this forum being flooded by spam.
Important notice: All artwork submitted on our public gallery forums gallery forums may or may not be used by OTOY for publication on our website gallery.
If you do not want us to publish your art, please mention it in your post clearly. (put a very red small diagonal cross in the left right corner of the image)
Any images already published on the gallery will be removed if the original author asks us to do so.
We recommend placing your credits on the images so you benefit from the exposure too, and use a minimum image width of 1200 pixels, and use pathtracing or PMC. Thanks for your attention, The OctaneRender Team.
For new users: this forum is moderated. Your first post will appear only after it has been reviewed by a moderator, so it will not show up immediately.
This is necessary to avoid this forum being flooded by spam.
-
Florinmocanu
- Posts: 101
- Joined: Wed Jun 02, 2010 11:49 am
- Attachments
-
Last edited by Florinmocanu on Mon Jun 14, 2010 8:20 am, edited 3 times in total.
3930k at 4.4 Ghz, Asus X79, 32GB DDR3. 1 x GTX 980Ti
Cool! Reminds me of the poem "Ode on a Grecian Urn":
Heard melodies are sweet, but those unheard
Are sweeter; therefore, ye soft pipes, play on;
Well...seriously, where's that porcelain/ clay container from?
Now I am very curious.
Heard melodies are sweet, but those unheard
Are sweeter; therefore, ye soft pipes, play on;
Well...seriously, where's that porcelain/ clay container from?
Now I am very curious.
Windows 7 64bit | Maya 2010 64 bit (main) | Maya 2011 | Intel i7-920 | Nvidia Quadro FX1800 | Nvidia GTX480
-
Florinmocanu
- Posts: 101
- Joined: Wed Jun 02, 2010 11:49 am
It's a pot from Kestner Museum in hannover, but i not all of the texture is from the same pot, i lacked good reference for it. it's always a problem with amateur photos taken with compact cameras, low res, noisy, maybe a bit blurry, without good focus etc..
So i'm using different bits and pieces from several greek pottery artifacts.
So i'm using different bits and pieces from several greek pottery artifacts.
3930k at 4.4 Ghz, Asus X79, 32GB DDR3. 1 x GTX 980Ti
in that case i'm even more impressed. Always like to see people putting the effort into their textures. you can really see the love!Florinmocanu wrote:It's a pot from Kestner Museum in hannover, but i not all of the texture is from the same pot, i lacked good reference for it. it's always a problem with amateur photos taken with compact cameras, low res, noisy, maybe a bit blurry, without good focus etc..
So i'm using different bits and pieces from several greek pottery artifacts.
-
Florinmocanu
- Posts: 101
- Joined: Wed Jun 02, 2010 11:49 am
Worked some more on the texture, focused on the foot and the checker decoration.
- Attachments
-
3930k at 4.4 Ghz, Asus X79, 32GB DDR3. 1 x GTX 980Ti
-
Florinmocanu
- Posts: 101
- Joined: Wed Jun 02, 2010 11:49 am
Did some more tweaking to the shading + tested the render with a AO pass made with octane as well.
Now i'm considering this 85% finished, i will start to do the rest of my still for the competition.
Now i'm considering this 85% finished, i will start to do the rest of my still for the competition.
- Attachments
-
3930k at 4.4 Ghz, Asus X79, 32GB DDR3. 1 x GTX 980Ti
Good job Florin
looks nice, you can almost touch it (without breaking it, of course) and if it's just a part of your entry, I'm sure is going to be a nice one.
Congrats
Congrats
windows 7 x64 | 2xGTX570 (warming up the planet 1ºC at a time) | i7 920 | 12GB
Nice work! I like it.
Good luck for the competition.
Good luck for the competition.
Win7 Pro x64 | GTX 770 2GB + GTS250 512Mb | Intel Xeon i7 4x 3.4ghz | 16 GB ECC Mem | Intel SSD 520 | Dell 27"
SOFTIMAGE l 2011 + OCTANE V1.20
SOFTIMAGE l 2011 + OCTANE V1.20
