OCTANE BENCHMARK: Submit performance scores for your rig!

[gabrielefx]

Hi,

I just get my new Titan gigabyte and test it with my small tower (with octane demo 1.10) :
PT wo shadows : 7.32 Ms/s
I have overclock the card with EVGA precision X 4.0 (GPU ofset + 300, and +500 at VRAM)
I'm happy because it performed (OC) as well as my 2x580GTX (OC too 7.37 Ms/s).
less noisy than my 2x580 !!

lucky man!

in Italy impossible to buy Titans at the moment. England and Germany are privileged states...

[bepeg4d]

lucky man!

in Italy impossible to buy Titans at the moment. England and Germany are privileged states...

hi gabriele, have you tried here?
http://www.eprice.it/search/qs=titan%20 ... n%20nvidia
ciao beppe

[Zay]

So the numbers for Titan are 6.35Ms/s for a stock Titan and 7.37Ms/s OC ?

[itou31]

Hi,

I just redo the bench with octane v 1.11 with the Titan overclocked
core offset+ 270 as +300 crash with big scene
Vram offset + 500
I get
PT (no shadow) : 8.25 Ms/s
DL : 31.57 Ms/s
PMC : 6.73 Ms/s

[ASyme1]

Hi,

I just redo the bench with octane v 1.11 with the Titan overclocked
core offset+ 270 as +300 crash with big scene
Vram offset + 500
I get
PT (no shadow) : 8.25 Ms/s
DL : 31.57 Ms/s
PMC : 6.73 Ms/s

Cool. Thanks for the test with 1.11. Can you re run it with ovclocking?

Just curious.
Thanks
Alec

[oguzbir]

1.11

gtx 680 + Titan - DL = 36.00 Ms/sec
gtx 680 + Titan - PT = 9.00 Ms/sec
gtx 680 + Titan - PMC = 7.29 Ms/sec

Titan - DL = 24.20 Ms/sec
Titan - PT = 5.96 Ms/sec
Titan - PMC= 4.88 Ms/sec

[itou31]

Hi oguzbir,
Your score are pretty low with 1.11.
My Titan no OC gets 6.35Ms/s on PT (no shadows) and stable OC gets 8.25 Ms/s.

[Refracty]

What are your final oc setting for stable use itou?
Is somebody using a Titan along a 590?

[itou31]

For my Titan gigabyte :
with software EVGA Precision X 4.0
+ 38mV
Power 106%
temp 85°C (priority)
Core offset : +270 MHz Stable for octane all of my scenes (+300MHz stable for the benchmark scene) I realized that if my scene is bigger than a VRAM limit/or geometry/texture, the displey crashs at +300MHz. I have to lower to +270 MHz to get it stable in some test scenes over 2 GB VRAM. I will try to make scene up to 6GB !
mem Offset : +500 MHz stable on all of my scene (< 2GB at the moment)

The software display 1280 MHz on the core and sometime down to 1267 MHz. Temp are < 70°C but fan get up to 75% and ambient temp is about 22°C

Edit : for playing Tombraider or Crysis 3 : Core +170 and mem +460

[Refracty]

itou, thanks for the detailed tips and settings.