Hi, I've been wanting to learn octane and render in general.
Finally i got a bit of time to do some exercise for the first time with some of furniture that I've designed.
Took a very long time to render, I must do something wrong here. (around 8 hrs)
I suspect the 4000x2000 render resolution might be the main problem.
if anyone could give me some advice, that would be greatly appreciated.. Thank you!
post processing, bit of selective colour with curve..
Desk and Lamp
Forum rules
Important notice: All artwork submitted on our public gallery forums gallery forums may or may not be used by OTOY for publication on our website gallery.
If you do not want us to publish your art, please mention it in your post clearly. (put a very red small diagonal cross in the left right corner of the image)
Any images already published on the gallery will be removed if the original author asks us to do so.
We recommend placing your credits on the images so you benefit from the exposure too, and use a minimum image width of 1200 pixels, and use pathtracing or PMC. Thanks for your attention, The OctaneRender Team.
For new users: this forum is moderated. Your first post will appear only after it has been reviewed by a moderator, so it will not show up immediately.
This is necessary to avoid this forum being flooded by spam.
Important notice: All artwork submitted on our public gallery forums gallery forums may or may not be used by OTOY for publication on our website gallery.
If you do not want us to publish your art, please mention it in your post clearly. (put a very red small diagonal cross in the left right corner of the image)
Any images already published on the gallery will be removed if the original author asks us to do so.
We recommend placing your credits on the images so you benefit from the exposure too, and use a minimum image width of 1200 pixels, and use pathtracing or PMC. Thanks for your attention, The OctaneRender Team.
For new users: this forum is moderated. Your first post will appear only after it has been reviewed by a moderator, so it will not show up immediately.
This is necessary to avoid this forum being flooded by spam.
-
mib2berlin
- Posts: 1194
- Joined: Wed Jan 27, 2010 7:18 pm
- Location: Germany
Hi, first thing is if you have not much glass in your setup reduce maxdepth to 4-6.
If it is to low glass looks black.
Next is causic_blur > 0.1 - 0.2
You don´t need PMC kernel in this setup use pathtracing, it is faster.
Are you rendering 16000 samples i 8 hrs?
Start with 1000, if is not enough set higher Octane render start from the last setting not from 0.
Please write your system specs in your signature, it helps now and later for support. (Forum > User Control Panel)
If you have a Nvidia GT 610 8 hrs is not much.
Cheers, mib.
If it is to low glass looks black.
Next is causic_blur > 0.1 - 0.2
You don´t need PMC kernel in this setup use pathtracing, it is faster.
Are you rendering 16000 samples i 8 hrs?
Start with 1000, if is not enough set higher Octane render start from the last setting not from 0.
Please write your system specs in your signature, it helps now and later for support. (Forum > User Control Panel)
If you have a Nvidia GT 610 8 hrs is not much.
Cheers, mib.
Opensuse Leap 42.3/64 i5-3570K 16 GB
GTX 760 4 GB Driver: 430.31
Octane 3.08 Blender Octane
GTX 760 4 GB Driver: 430.31
Octane 3.08 Blender Octane
Thank you for the advice!
i've just made the signature, hope it show up..
i got single gtx 580, would 8hr still be justifiable with this spec? when i initially start render it shows 16hrs, though i stopped at 8hrs.
and could you explain me a bit more about the causic_blur > 0.1 - 0.2 ? not to sure what this option does..
thank you mib!
i've just made the signature, hope it show up..
i got single gtx 580, would 8hr still be justifiable with this spec? when i initially start render it shows 16hrs, though i stopped at 8hrs.
and could you explain me a bit more about the causic_blur > 0.1 - 0.2 ? not to sure what this option does..
thank you mib!
Win 7 64 /// Intel Core2 Quad Q8300 2.50GHz 8gbRam //// Single GTX 580 1.5GB
-
mib2berlin
- Posts: 1194
- Joined: Wed Jan 27, 2010 7:18 pm
- Location: Germany
Ha, typo, it is caustic_blur.
As far as I understand it blurs very bright areas of a picture but cost accuracy.
The GTX 580 is the fastest single card on earth atm., I think this picture should render 5 minutes to get clear.
Octane is designed to render forever, stop it if the picture is correct and clear.
Cheers, mib.
EDIT: I forgot the size, 5 minutes is a bit optimistic.
As far as I understand it blurs very bright areas of a picture but cost accuracy.
The GTX 580 is the fastest single card on earth atm., I think this picture should render 5 minutes to get clear.
Octane is designed to render forever, stop it if the picture is correct and clear.
Cheers, mib.
EDIT: I forgot the size, 5 minutes is a bit optimistic.
Opensuse Leap 42.3/64 i5-3570K 16 GB
GTX 760 4 GB Driver: 430.31
Octane 3.08 Blender Octane
GTX 760 4 GB Driver: 430.31
Octane 3.08 Blender Octane