ciao beppe
Interior
Forum rules
Important notice: All artwork submitted on our public gallery forums gallery forums may or may not be used by OTOY for publication on our website gallery.
If you do not want us to publish your art, please mention it in your post clearly. (put a very red small diagonal cross in the top left corner of the image)
Any images already published on the gallery will be removed if the original author asks us to do so.
We recommend placing your credits on the images so you benefit from the exposure too, and use a minimum image width of 1200 pixels, and pathtracing or PMC. Thanks for your attention, The OctaneRender Team.
For new users: this forum is moderated. Your first post will appear only after it has been reviewed by a moderator, so it will not show up immediately.
This is necessary to avoid this forum being flooded by spam.
Important notice: All artwork submitted on our public gallery forums gallery forums may or may not be used by OTOY for publication on our website gallery.
If you do not want us to publish your art, please mention it in your post clearly. (put a very red small diagonal cross in the top left corner of the image)
Any images already published on the gallery will be removed if the original author asks us to do so.
We recommend placing your credits on the images so you benefit from the exposure too, and use a minimum image width of 1200 pixels, and pathtracing or PMC. Thanks for your attention, The OctaneRender Team.
For new users: this forum is moderated. Your first post will appear only after it has been reviewed by a moderator, so it will not show up immediately.
This is necessary to avoid this forum being flooded by spam.
yes sorry, dl 4 diffuse
ciao beppe
ciao beppe
-
merid888
hi, nice renders, i have 2 gtx470 and use directlight too, but i put specular 8, glossydepth 8, aodistance 6 and diffusedepth 8, time is maximun with 6 000 samples = 3.5 hours, 20 000 samples = 6 or 7 hours, never 24 hours, i talk about 1200 x 1000 px size none photoshop
congratulation !!!
congratulation !!!
-
Philipp1980
- Posts: 68
- Joined: Thu Dec 15, 2011 9:56 am
@peppe: it was rendered with DL Diffuse
@merdi888: maybe we should try your settings then and give it a try again
@merdi888: maybe we should try your settings then and give it a try again
I still don´t get why this takes 24 hours...!
Especially with Direct Light. And 4 x GTX580....
Check out http://render.otoy.com/forum/viewtopic.php?f=5&t=22466
gabrielefx rendered with 4 x GTX580, PMC, 4000 x 3000 px in 12 hours.
There must be something wrong in your setup...
Especially with Direct Light. And 4 x GTX580....
Check out http://render.otoy.com/forum/viewtopic.php?f=5&t=22466
gabrielefx rendered with 4 x GTX580, PMC, 4000 x 3000 px in 12 hours.
There must be something wrong in your setup...
Intel i7-970 @3,20 GHz / 24 GB RAM / 3 x EVGA GTX 580 - 3GB
I still don´t get why this takes 24 hours...!
Especially with Direct Light. And 4 x GTX580....
Check out http://render.otoy.com/forum/viewtopic.php?f=5&t=22466
gabrielefx rendered with 4 x GTX580, PMC, 4000 x 3000 px in 12 hours.
There must be something wrong in your setup...
that's what i'm saying!
Intel Core i7 920 @ 2.67GHz, 6.00 GB, 896 MBGeForce GTX 260 (x2), Windows
RIBS_stairs
http://www.refractivesoftware.com/forum ... =5&t=17973
RIBS_stairs
http://www.refractivesoftware.com/forum ... =5&t=17973
-
Philipp1980
- Posts: 68
- Joined: Thu Dec 15, 2011 9:56 am
I really have the imrepssion i shocked u guys cauz of the long rendertime 
. Sorry for that 
!
I don't know, if u can compare the scene Gabrielefx made with this one. If i got him right, he used an emitting panel inside the room for example. And i don't know which settings his cards are running with. We slowed ours a bit down, cauz of the heat (core and memory clock).
But i am sure, there is a lot of space to optimize the scene, cauz we didn't do anything in that direction
. Was the first interior we did with octane and didn't focus reducing rendertime, just wanted a nice result.
And to be honest i am not sure now, if we used 3 or 4 cards. Normaly the card the screens are connected with isn't activated in Octane. So maybe we have forgotten to switch it on again and it could have been a little faster. But i am too lazy to render it again to figure that out
.
. Sorry for that !I don't know, if u can compare the scene Gabrielefx made with this one. If i got him right, he used an emitting panel inside the room for example. And i don't know which settings his cards are running with. We slowed ours a bit down, cauz of the heat (core and memory clock).
But i am sure, there is a lot of space to optimize the scene, cauz we didn't do anything in that direction
. Was the first interior we did with octane and didn't focus reducing rendertime, just wanted a nice result.And to be honest i am not sure now, if we used 3 or 4 cards. Normaly the card the screens are connected with isn't activated in Octane. So maybe we have forgotten to switch it on again and it could have been a little faster. But i am too lazy to render it again to figure that out
.-
archigrafix
- Posts: 201
- Joined: Tue Jan 26, 2010 5:37 pm
- Location: FRANCE
Huge rendering times for that resolution!!!!
There is a problem somewhere IMO. I often (not saying always...) use DL for my renderings and with reasonnable Computer Spec I get much much less time to render even at 4000x2000
IMO you get problems with your Window glass!
Interest in OCTANE is of course speed! When rendering with maxwell my time unit is hour... with Octane it is minutes. If not I feel I am missing something about the tool.
There is a problem somewhere IMO. I often (not saying always...) use DL for my renderings and with reasonnable Computer Spec I get much much less time to render even at 4000x2000
IMO you get problems with your Window glass!
Interest in OCTANE is of course speed! When rendering with maxwell my time unit is hour... with Octane it is minutes. If not I feel I am missing something about the tool.