OCTANE BENCHMARK: Submit performance scores for your rig!

[colorlabs]

Zay - are you talking about entry #3? That's two 470's!

[Timmaigh]

matej: that sounds fine, they claim they didn't change pathtracing code...

C'MON GUYS WE NEED MORE DATA POINTS! ESPECIALLY NON-GTX460 OWNERS!

2.47 is cuda 4.0, 2.46b is either 3.0 and 3.2....therefore the scores for 2.47 are higher.

[Zay]

Zay - are you talking about entry #3? That's two 470's!

Me bad! Didn't noticed that

But it would be nice if people also added if the card was OC and which driver was used.

[colorlabs]

Good idea Zay, I've added a question about OC to the form.

[Proupin]

That form is spammable

[Jaberwocky]

Good idea Zay, I've added a question about OC to the form.

The only problem with that is , what's the base line?

For example.My Gigabyte GTX460 is running at stock speed which is 715 Mhz

I know for a fact that some other makes of cards that run at stock speed are running at 675 MHz

There are of course quite a number of special cards out there that run at varying speeds above 675 Mhz.

So even if the user does not overclock their cards.They could all still be running at various speeds.

Not that a few Mhz here and there is going to make a huge amount of difference.

[dave62]

justed posted the result. just want to add that i used the testbuild 2.47 for the benchmark.
4.1 Ms/sec gtx580/3gb

[colorlabs]

Thanks everyone so far!!

Looks like someone posted a GTX 560 with a speed of 5 Ms/sec. This is clearly a typo, at least I hope so or I bought the wrong card! Could whoever posted this re-submit and make sure you enabled pathtracing mode in Octane?

Or if anyone else with a 560 wants to post theirs that would be appreciated! With that and a 590, a 480, and a 465 we'll have at least one of each!

[Timmaigh]

Thanks everyone so far!!

Looks like someone posted a GTX 560 with a speed of 5 Ms/sec. This is clearly a typo, at least I hope so or I bought the wrong card! Could whoever posted this re-submit and make sure you enabled pathtracing mode in Octane?

Or if anyone else with a 560 wants to post theirs that would be appreciated! With that and a 590, a 480, and a 465 we'll have at least one of each!

You definitely did buy the right card.

I will post gtx590 results perhaps tomorrow. I think you shoud decide whether you want to people make the test with either 2.46 or 2.47, cause if they keep posting results from both versions, the conclusions will be flawed (as both releases differ in CUDA versions, which has significant impact on performance).

[matej]

I've done the benchmark with 2.47 and I've entered my username in the form, so my entry can be removed.

I'm not sure about the significant performance gains with CUDA 4.0, tho. I haven't noticed much difference