OctaneRender 2019.1 LightWave upcoming releases note

Forums: OctaneRender 2019.1 LightWave upcoming releases note
Newtek Lightwave 3D (exporter developed by holocube, Integrated Plugin developed by juanjgon)

OctaneRender 2019.1 LightWave upcoming releases note

Postby juanjgon » Fri Jul 19, 2019 8:00 am

juanjgon Fri Jul 19, 2019 8:00 am
Hi,

Just a quick note to apologize for the delay in the release of the 2019.1 RC1/2 LightWave plugin builds. I've been working on the refactoring of the LightWave plugin nodes building core code to make the plugin support and development easier and faster, and this work is taking longer than planned. If all works fine, the 2019.1 RC LightWave plugin will be available before the end of the month. After this refactoring, updating the plugin in the future for versions including new nodes, like this 2019.1 release (that has a lot of them), should be a lot faster.

Thanks for your patience,
-Juanjo
Last edited by juanjgon on Fri Jul 26, 2019 9:51 am, edited 1 time in total.
Computer Graphics Software Developer
Octane plugin development and support: LightWave and Houdini
User avatar
juanjgon
Octane Plugin Developer
Octane Plugin Developer
 
Posts: 7045
Joined: Tue Jan 19, 2010 12:01 pm
Location: Spain

Re: OctaneRender 2019.1 LightWave upcoming releases note

Postby Lewis » Fri Jul 19, 2019 11:34 am

Lewis Fri Jul 19, 2019 11:34 am
Thanks for info Juan and kudos for great work and support :).

While you are in the mood of adding new nodes please try to see is it possible to add proper gradient node in LW ;).
thanks
--
Lewis
http://www.ram-studio.hr
Skype - lewis3d
ICQ - 7128177

WS Dual Xeon E5-2698v4, 128GB RAM, Win10, 2x2080Ti + 2x1080Ti
RS1 Dual Xeon E5-2690, 64GB RAM, Win8, 2080Ti + 2x1080Ti + TitanX(M)
RS2 i7 6850K, 64GB RAM, Win10, 2*1080Ti
User avatar
Lewis
Licensed Customer
Licensed Customer
 
Posts: 794
Joined: Tue Feb 05, 2013 6:30 pm
Location: Croatia

Re: OctaneRender 2019.1 LightWave upcoming releases note

Postby Carlos3D » Fri Jul 19, 2019 1:53 pm

Carlos3D Fri Jul 19, 2019 1:53 pm
Thanks Juanjo.

I was not using LW2019.1 just because Octane was not working properly.

Thanks for the update.
User avatar
Carlos3D
Licensed Customer
Licensed Customer
 
Posts: 43
Joined: Thu Feb 26, 2015 5:45 pm

Re: OctaneRender 2019.1 LightWave upcoming releases note

Postby Carlos3D » Fri Jul 19, 2019 2:03 pm

Carlos3D Fri Jul 19, 2019 2:03 pm
I'm working on a project but I'm having some difficulty.

I want to render an image seen from above the space.

But without me removing the cover I want to see everything in there.

Something similar to Clipping map. But in a prespective view

The idea is for me to preserve the external light by penetrating through the windows.

If I hide the coverage the sunlight green effect

How do I do this in Octane?
Attachments
011.jpg
User avatar
Carlos3D
Licensed Customer
Licensed Customer
 
Posts: 43
Joined: Thu Feb 26, 2015 5:45 pm

Re: OctaneRender 2019.1 LightWave upcoming releases note

Postby juanjgon » Fri Jul 19, 2019 4:24 pm

juanjgon Fri Jul 19, 2019 4:24 pm
Carlos3D wrote:Thanks Juanjo.

I was not using LW2019.1 just because Octane was not working properly.

Thanks for the update.


I'm talking about the Octane 2019.1 plugin builds, not the LightWave 2019.1 release. All the current plugins for LightWave 2019.0 should work fine in LightWave 2019.1 ... there are no changes in the SDK affecting the Octane plugin. Why do you say that Octane doesn't work properly on LightWave 2019.1?

Thanks,
-Juanjo
Computer Graphics Software Developer
Octane plugin development and support: LightWave and Houdini
User avatar
juanjgon
Octane Plugin Developer
Octane Plugin Developer
 
Posts: 7045
Joined: Tue Jan 19, 2010 12:01 pm
Location: Spain

Re: OctaneRender 2019.1 LightWave upcoming releases note

Postby juanjgon » Fri Jul 19, 2019 4:26 pm

juanjgon Fri Jul 19, 2019 4:26 pm
Carlos3D wrote:I'm working on a project but I'm having some difficulty.

I want to render an image seen from above the space.

But without me removing the cover I want to see everything in there.

Something similar to Clipping map. But in a prespective view

The idea is for me to preserve the external light by penetrating through the windows.

If I hide the coverage the sunlight green effect

How do I do this in Octane?


You could make the ceiling as an individual object and enable the "unseen by camera".

Thanks,
-Juanjo
Computer Graphics Software Developer
Octane plugin development and support: LightWave and Houdini
User avatar
juanjgon
Octane Plugin Developer
Octane Plugin Developer
 
Posts: 7045
Joined: Tue Jan 19, 2010 12:01 pm
Location: Spain

Re: OctaneRender 2019.1 LightWave upcoming releases note

Postby Carlos3D » Fri Jul 19, 2019 8:03 pm

Carlos3D Fri Jul 19, 2019 8:03 pm
juanjgon wrote:
Carlos3D wrote:Thanks Juanjo.

I was not using LW2019.1 just because Octane was not working properly.

Thanks for the update.


I'm talking about the Octane 2019.1 plugin builds, not the LightWave 2019.1 release. All the current plugins for LightWave 2019.0 should work fine in LightWave 2019.1 ... there are no changes in the SDK affecting the Octane plugin. Why do you say that Octane doesn't work properly on LightWave 2019.1?

Thanks,
-Juanjo




On my computer Octane was responding badly in the Node editor window. the update of the properties of the nodes were not immediate, so I select the node of the Octane.
User avatar
Carlos3D
Licensed Customer
Licensed Customer
 
Posts: 43
Joined: Thu Feb 26, 2015 5:45 pm

Re: OctaneRender 2019.1 LightWave upcoming releases note

Postby Carlos3D » Fri Jul 19, 2019 8:31 pm

Carlos3D Fri Jul 19, 2019 8:31 pm
Carlos3D wrote:
juanjgon wrote:
Carlos3D wrote:Thanks Juanjo.

I was not using LW2019.1 just because Octane was not working properly.

Thanks for the update.


I'm talking about the Octane 2019.1 plugin builds, not the LightWave 2019.1 release. All the current plugins for LightWave 2019.0 should work fine in LightWave 2019.1 ... there are no changes in the SDK affecting the Octane plugin. Why do you say that Octane doesn't work properly on LightWave 2019.1?

Thanks,
-Juanjo




On my computer Octane was responding badly in the Node editor window. the update of the properties of the nodes were not immediate, so I select the node of the Octane.




Thank you very much Juanjo.

I did not even think about it.

I always thought this did not work with Octane.

And it works beautifully.
User avatar
Carlos3D
Licensed Customer
Licensed Customer
 
Posts: 43
Joined: Thu Feb 26, 2015 5:45 pm

Re: OctaneRender 2019.1 LightWave upcoming releases note

Postby pixym » Sat Jul 20, 2019 2:00 am

pixym Sat Jul 20, 2019 2:00 am
Hi Juanjo,

I have just downloaded and installed LW 2019.1 and Octane render 4.0.4 for LW.
So far, I have just noticed a huge slow down while Octane is reading objects before rendering… Is that a "normal" behaviour ?
Work Station : MB ASUS X299-Pro/SE - Intel i9 7980XE (2,6ghz 18 cores / 36 threads) - 32GB - 2 GTX 1080 TI - Win 10 64
NET RENDER : MB Biostar TB250-BTC Pro - Celeron 2C/2T - Open "Mining" Rig - 2 RTX 2080 TI - Win 7
pixym
Licensed Customer
Licensed Customer
 
Posts: 528
Joined: Thu Jan 21, 2010 4:27 pm
Location: French West Indies

Re: OctaneRender 2019.1 LightWave upcoming releases note

Postby AndyM1969 » Sat Jul 20, 2019 9:51 am

AndyM1969 Sat Jul 20, 2019 9:51 am
What about the next 2018 release?
AndyM1969
Licensed Customer
Licensed Customer
 
Posts: 148
Joined: Thu Jun 02, 2016 8:26 pm
Next

Return to Lightwave 3D


Who is online

Users browsing this forum: wireframex and 1 guest

Mon Nov 18, 2019 8:57 pm [ UTC ]