OctaneRender™ 4.01 for LightWave™ - stable build 4.01.1.0

Forums: OctaneRender™ 4.01 for LightWave™ - stable build 4.01.1.0
Newtek Lightwave 3D (exporter developed by holocube, Integrated Plugin developed by juanjgon)

Moderator: juanjgon

Re: OctaneRender™ 4.01 for LightWave™ - stable build 4.01.1.0

Postby KVNOODLES » Fri Dec 21, 2018 12:20 am

KVNOODLES Fri Dec 21, 2018 12:20 am
I've tried to convert my little scene in orbx, I load it into the standalone and...? Hard reset ! Same issue.

My current Nvidia drivers is 417.35 WHQL.

I've reseted all the drivers settings by default but nothing...Again the hard reset comes at the end of the IPR render.
KVNOODLES
Licensed Customer
Licensed Customer
 
Posts: 63
Joined: Mon May 18, 2015 11:02 am
Location: Los Angeles

Re: OctaneRender™ 4.01 for LightWave™ - stable build 4.01.1.0

Postby KVNOODLES » Fri Dec 21, 2018 7:51 am

KVNOODLES Fri Dec 21, 2018 7:51 am
I'm figured out which NVidia drivers are prefered for Octane ?

Hope that will solve this issue.
KVNOODLES
Licensed Customer
Licensed Customer
 
Posts: 63
Joined: Mon May 18, 2015 11:02 am
Location: Los Angeles

Re: OctaneRender™ 4.01 for LightWave™ - stable build 4.01.1.0

Postby juanjgon » Fri Dec 21, 2018 10:57 am

juanjgon Fri Dec 21, 2018 10:57 am
Here I'm still working with the 398.11 drivers without problems so far.

Thanks,
-Juanjo
Computer Graphics Software Developer
Octane plugin development and support: LightWave and Houdini
User avatar
juanjgon
Octane Plugin Developer
Octane Plugin Developer
 
Posts: 8223
Joined: Tue Jan 19, 2010 12:01 pm
Location: Spain

Re: OctaneRender™ 4.01 for LightWave™ - stable build 4.01.1.0

Postby KVNOODLES » Fri Dec 21, 2018 4:59 pm

KVNOODLES Fri Dec 21, 2018 4:59 pm
Hi Juan,

I've tried with 398.11, no result.

It crashes at the end of rendering when the imager denoiser is acivated.

Older version like 3.07 and 3.08 works perfectly...
KVNOODLES
Licensed Customer
Licensed Customer
 
Posts: 63
Joined: Mon May 18, 2015 11:02 am
Location: Los Angeles

Re: OctaneRender™ 4.01 for LightWave™ - stable build 4.01.1.0

Postby juanjgon » Sat Dec 22, 2018 5:21 pm

juanjgon Sat Dec 22, 2018 5:21 pm
What a weird issue. Here the denoiser works fine, and I don't have other reports about a problem like that. Do you get this crash with any scene? and what happens if you try to render/denoise only with one GPU, disabling the other one?

Thanks,
-Juanjo
Computer Graphics Software Developer
Octane plugin development and support: LightWave and Houdini
User avatar
juanjgon
Octane Plugin Developer
Octane Plugin Developer
 
Posts: 8223
Joined: Tue Jan 19, 2010 12:01 pm
Location: Spain

Re: OctaneRender™ 4.01 for LightWave™ - stable build 4.01.1.0

Postby KVNOODLES » Mon Dec 24, 2018 4:02 pm

KVNOODLES Mon Dec 24, 2018 4:02 pm
Hi Juan,

Yes of course, I've this issue with all my scenes when the denoiser is activated...If I put 500 samples with denoising, my PC crashes and restarts when the 500 are reached. It's the same thing for the standalone.

Maybe, It sounds like a TDR issue or a wrong memory buffer that's not freeing correctly.

I've tried with my gpus one by one, and it crashes too.

Only the denoising option causes the crash...It's really crazy.
KVNOODLES
Licensed Customer
Licensed Customer
 
Posts: 63
Joined: Mon May 18, 2015 11:02 am
Location: Los Angeles

Re: OctaneRender™ 4.01 for LightWave™ - stable build 4.01.1.0

Postby amathews9518 » Mon Dec 24, 2018 9:06 pm

amathews9518 Mon Dec 24, 2018 9:06 pm
Same crash here on denoiser.
Only on higher resolution though.
No crash with denoiser disabled.
W764 2xE5 2650 3-780(3GB) + 780TI(3GB) Asrack EP2C602 40gb Lightwave & Chief Architect
amathews9518
Licensed Customer
Licensed Customer
 
Posts: 53
Joined: Fri Jul 22, 2011 10:11 pm

Re: OctaneRender™ 4.01 for LightWave™ - stable build 4.01.1.0

Postby KVNOODLES » Tue Jan 22, 2019 6:48 pm

KVNOODLES Tue Jan 22, 2019 6:48 pm
I Juanjo,

I've investigated a little bit more,and apparently, my issue could be due to a power supply that not deliver enough juice...
It's weird because DELL T7500 PSUs deliver 1100w of power,normally it enough...Several users on the Octane/lightwave facebook thread tell me that denoiser use a lot of power...

It's probably a way to explore... Jules Urbach tells me that : I wonder if this PSY issue would be further mitigated on RTX cards where the denoiser is using the much faster fp16 cores with much less power drain.

So actually, I'm using Titans X maxwell, and I don't own specific RTX to try in my stations.

Maybe Titan X Maxwell demands more power...I don't know...
KVNOODLES
Licensed Customer
Licensed Customer
 
Posts: 63
Joined: Mon May 18, 2015 11:02 am
Location: Los Angeles

Re: OctaneRender™ 4.01 for LightWave™ - stable build 4.01.1.0

Postby Lewis » Tue Jan 22, 2019 6:51 pm

Lewis Tue Jan 22, 2019 6:51 pm
KVNOODLES wrote:Maybe Titan X Maxwell demands more power...I don't know...


TitanX Maxwell is 250 TDP and RTX 2080Ti is 260W TDP so not really.
--
Lewis
http://www.ram-studio.hr
Skype - lewis3d
ICQ - 7128177

WS Dual Xeon E5-2698v4, 128GB RAM, Win10, 4 * RTX 2080Ti
RS1 i7 9800X, 64GB RAM, Win10, 3 * GTX 1080Ti
RS2 i7 6850K, 64GB RAM, Win10, 3 * GTX 1080Ti
User avatar
Lewis
Licensed Customer
Licensed Customer
 
Posts: 966
Joined: Tue Feb 05, 2013 6:30 pm
Location: Croatia
Previous

Return to Lightwave 3D


Who is online

Users browsing this forum: No registered users and 2 guests

Tue May 11, 2021 2:27 am [ UTC ]