OctaneRender 3 for ArchiCAD [OBSOLETE]

[Daniel_Ward]

Hi Paul,

I'm sure you've got your hands full with other things, but I've found that the current plug-in build crashes ArchiCAD trying to activate. It's fine if the licence is already active on the PC, but if it need to acquire an available licence, ArchiCAD crashes to desktop.
The only way I can activate Octane for ArchiCAD at the moment is to have one of my older ArchiCAD's (v19 in this case) still on 3.07, so I can use that build to acquire the licence, then switch to AC20 or 21 on the 3.08 build and it doesn't then have any issues because the licence is already active on my PC.

Hope this makes sense?

Cheers, Dan.

[face_off]

I'm sure you've got your hands full with other things, but I've found that the current plug-in build crashes ArchiCAD trying to activate. It's fine if the licence is already active on the PC, but if it need to acquire an available licence, ArchiCAD crashes to desktop.

This is fixed in the next Octane build (RC2). I will post a plugin installer for it today.

Paul

[face_off]

I have updated the TEST build installers at the top of this thread with:

3.8.0.81
- Compiled with Octane 3.08 RC2

This should resolve the crash when trying to authenticate.

Thanks

Paul

[Jasonr]

Hi Paul.
For the first time I get this error:
This happened after I applied a texture with displacement channel and checked "Follow smoothed Normal"
Suddenly octane freezes with really slow reaction.
Any clue??

thank you

CUDA error 702 on device 2: the launch timed out and was terminated
-> kernel execution failed(report)
CUDA error 702 on device 2: the launch timed out and was terminated
-> failed to launch kernel(ptBrdf2)
device 2: direct light kernel failed
CUDA error 702 on device 0: the launch timed out and was terminated
-> kernel execution failed(report)
CUDA error 702 on device 0: the launch timed out and was terminated
-> failed to launch kernel(ptBrdf2)
device 0: direct light kernel failed
CUDA error 702 on device 0: the launch timed out and was terminated
-> failed to unregister pinned memory
CUDA error 702 on device 0: the launch timed out and was terminated
-> could not get memory info
CUDA error 702 on device 0: the launch timed out and was terminated
-> failed to unregister pinned memory
CUDA error 702 on device 0: the launch timed out and was terminated
-> could not get memory info
CUDA error 702 on device 0: the launch timed out and was terminated
-> failed to unregister pinned memory
CUDA error 702 on device 0: the launch timed out and was terminated
-> could not get memory info
CUDA error 702 on device 2: the launch timed out and was terminated
CUDA error 702 on device 0: the launch timed out and was terminated
-> failed to deallocate device memory
-> failed to deallocate device memory
CUDA error 702 on device 2: the launch timed out and was terminated
-> could not get memory info
device 2: failed to upload data texture 4 of context 0
CUDA error 702 on device 0: the launch timed out and was terminated
-> could not get memory info
device 0: failed to upload data texture 4 of context 0

[Jasonr]

I tried with a different texture with displacement channel at the same model and I get this error:

CUDA error 719 on device 0: unspecified launch failure
-> kernel execution failed(report)
CUDA error 719 on device 0: unspecified launch failure
-> failed to launch kernel(ptBrdf2)
device 0: direct light kernel failed
CUDA error 719 on device 2: unspecified launch failure
-> failed to copy memory to device.
CUDA error 719 on device 2: unspecified launch failure
-> failed to launch kernel(init3)
device 2: direct light kernel failed

After that Octane freezes.
This happens when I set the follow smoothed normal

[face_off]

For the first time I get this error:
This happened after I applied a texture with displacement channel and checked "Follow smoothed Normal"
Suddenly octane freezes with really slow reaction.
Any clue??

Are you using the latest version? If you save to ORBX and load into Octane Standalone, do you get the same error?

Paul

[rappet]

Hi Paul.
For the first time I get this error:
This happened after I applied a texture with displacement channel and checked "Follow smoothed Normal"
Suddenly octane freezes with really slow reaction.
Any clue??

thank you

CUDA error 702 on device 2: the launch timed out and was terminated
-> failed to launch kernel(ptBrdf2)
device 2: direct light kernel failed
CUDA error 702 on device 0: the launch timed out and was terminated
-> kernel execution failed(report)
...

Hi Jason,
Seems you have no problem on device 1... are you rendering with your two titans and your quador or only with your two titans (and not with device 1)?
greetz?

[Jasonr]

I am using only the two Titans.
I made a test with standalone I got the same results.
Octane freezed and the info text became red with "all failed" message.

I tried with a simple archicad file of just two walls, enabled the smoot option normal and again octane freezes with the following error message:
Started logging on 20.03.18 13:57:48

OctaneRender 3.08 RC 2 (3080011)

Could not load 'I:\GRAPHISOFT\ARCHICAD 21\ARCHICAD Library 21\Electrical\Электроблок 16—21.lcf\1.6 AC16—21\3D\Textures\AluminiumBrushed.jpg:rgba'.
Could not load 'I:\GRAPHISOFT\ARCHICAD 21\ARCHICAD Library 21\Electrical\Электроблок 16—21.lcf\1.6 AC16—21\3D\Textures\gf_LightWhite.bmp:rgba'.
CUDA error 702 on device 2: the launch timed out and was terminated
-> kernel execution failed(report)
CUDA error 702 on device 2: the launch timed out and was terminated
-> failed to launch kernel(ptBrdf2)
device 2: direct light kernel failed
CUDA error 702 on device 0: the launch timed out and was terminated
-> kernel execution failed(report)
CUDA error 702 on device 0: the launch timed out and was terminated
-> failed to launch kernel(ptBrdf2)
device 0: direct light kernel failed
CUDA error 702 on device 0: the launch timed out and was terminated
-> failed to unregister pinned memory
CUDA error 702 on device 0: the launch timed out and was terminated
-> could not get memory info
CUDA error 702 on device 0: the launch timed out and was terminated
-> failed to unregister pinned memory
CUDA error 702 on device 0: the launch timed out and was terminated
-> could not get memory info
CUDA error 702 on device 0: the launch timed out and was terminated
-> failed to unregister pinned memory
CUDA error 702 on device 0: the launch timed out and was terminated
-> could not get memory info
CUDA error 702 on device 2: the launch timed out and was terminated
CUDA error 702 on device 0: the launch timed out and was terminated
-> failed to load symbol data to the device(deep_data)
-> failed to load symbol data to the device(deep_data)
device 2: failed to upload the deep params
device 0: failed to upload the deep params

[face_off]

As indicated above, you need to export to ORBX and see if you get the same error in Octane Standalone 3.08 RC2.

Paul

[Jasonr]

Hi Paul.
I have tested it already and it seems that the problem persists.
I cannot find the log in the standalone to upload the error.