OTOY Forums

is this happening only on this scene?

Hi,

no it happened in all scenes. It also seemed, that there is a performance problem as well.

Anyway, I fixed it (for the moment?).

I changed some settings in the nvidia control panel and found a website that recomended to download some cuda samples and the cuda toolkit to check if the graphic card is working the right way. I installed this kit and it works.

Somehow the fixing process actually felt like this

https://www.youtube.com/watch?v=wz-PtEJEaqY

...but it worked.


Best
Waldemar

Hey!

I have a same problem.

So, what's happened:

In different scenes ( with many polygons or not, it doesn't matter) - render is stops. Usually it happen on the second frame.

After reading forum and topics with same story - I decided to re install windows. It's doesn't help. I re install different versions of NVIDIA drivers - it doesn't help.

So:

1) Windows 10 pro (trying to reinstall OS and run octane on clear system - it doesn't help)
2) 780ti 3Gb + 780ti 3 Gb + 1070 6Gb ( I was trying to render problem scenes with one of them - 1070 or 780ti - it doesn't help)
3) RAM - 32 gb
4) NVIDIA drivers - 372.90 ( I was try to install diferent versions - 368.69 , 372.90, 375.70, 376.33 - it doesn't help)
5) Octane Standalone - 3.03.3 ( I was try to install diferent versions - 3.03.3, 3.04.3, 3.04.5 - guess what? It doesn't help)
6) Cinema4d Plugin 3.03.3 R1 (same story about different versions ....)
7) Cinema 4d - 18.011 (same story with different versions 17.055 - it doesn't help)

File project (cinema 4d - octane plugin version 3.03.3 R1): https://www.dropbox.com/s/8uhik1qdpt2en ... T.zip?dl=0


At the moment, I can't stable work. What's going on guys? There are a few topics on the forum with same problem - and still no solution!

can not confirm.
your scene renders just fine here. rendered 14 frames for the sake of a test.
i am using the latest versions of all: plug-in, standalone and r18.028. win7 pro with nvidia driver 376.33.

anatolikbelikov wrote:Hey!

I have a same problem.

So, what's happened:

In different scenes ( with many polygons or not, it doesn't matter) - render is stops. Usually it happen on the second frame.

After reading forum and topics with same story - I decided to re install windows. It's doesn't help. I re install different versions of NVIDIA drivers - it doesn't help.

So:

1) Windows 10 pro (trying to reinstall OS and run octane on clear system - it doesn't help)
2) 780ti 3Gb + 780ti 3 Gb + 1070 6Gb ( I was trying to render problem scenes with one of them - 1070 or 780ti - it doesn't help)
3) RAM - 32 gb
4) NVIDIA drivers - 372.90 ( I was try to install diferent versions - 368.69 , 372.90, 375.70, 376.33 - it doesn't help)
5) Octane Standalone - 3.03.3 ( I was try to install diferent versions - 3.03.3, 3.04.3, 3.04.5 - guess what? It doesn't help)
6) Cinema4d Plugin 3.03.3 R1 (same story about different versions ....)
7) Cinema 4d - 18.011 (same story with different versions 17.055 - it doesn't help)

File project (cinema 4d - octane plugin version 3.03.3 R1): https://www.dropbox.com/s/8uhik1qdpt2en ... T.zip?dl=0


At the moment, I can't stable work. What's going on guys? There are a few topics on the forum with same problem - and still no solution!

Also no problems rendering your scene. Tried 2 frames (42 - 43).
I'm Using Octane 3.05.1, C4D R18.028, 32 GB Mmemory, 3-TitanX (Maxwell), Nvidia Driver 376.33
The scene initially took a few seconds to load.
I also tried reducing your HDR file by 50% and that did load much faster and the render still looked OK to me.

Hi anatolikbelikov,
as other users, I was able to render your entire sequence on both Win 7 with 1070 and Mac with 970 without issues: Are you sure that your motherboard and CPU are correct for multi GPU?
Maybe it is a specific overheating issue.. have you tried to check with GPU-Z your cards while rendering?
ciao beppe

Hi!

Thanx for test!

Yeah, my system is totally fine with multi-GPU:

GIGABYTE GA-X99-Ultra Gaming (rev. 1.0)
I7 - 6850k

Anyway, something going wrong so and I'm not one who have a same problem and error. So we need find solution for this.

What else I can post here, maybe other logs or whatever else, which can help?

P.s. temperature is fine (1070 - cold, 780ti - 55-65C)

Hi anatolikbelikov,
are you using other software that works with CUDA?
Have you try to close every other application and useless service while rendering?
ciao beppe

anatolikbelikov wrote:Anyway, something going wrong so and I'm not one who have a same problem and error. So we need find solution for this.

What else I can post here, maybe other logs or whatever else, which can help?

P.s. temperature is fine (1070 - cold, 780ti - 55-65C)

Work with 3.05.1 and keep open your Octane log window while rendering and see for any errors. Most likely it's a problem on your setup.