andredms wrote:Seekerfinder wrote:Usually, there is some level difference between a pad and an undulating site (and all sites are undulating to some degree or another). What confused me about your post is that there seemed not be any level difference between the two, so it was hard to distinguish between the site and pad.
The building pad almost never have the same materials as the toposurface site, because a building pad is equivalent to the building foundation, is the flat foundation used to construct the building over it - and it can't be made of grass.
The scene shown in the pictures and on the submitted file to Paul have a flat toposurface and a single material (no subregions configured). If your building pad is large enough, this effect will diminish, but not go away - to see it clearly, you must have to do a small building pad away from the edges of a flat toposurface.
Andre,
I thought you had a pad around your floor... However, the material of the pad seems to be irrelevant in trying to reproduce your issue. Below is another image of a 1x1M building pad (how small should I go?) with a different material on a level topo surface. No issues here.
Paul,
There seems to be some fall-off going on in Andre's scene(?) Would be a nice feature if you can tame it!
Seeker