Page 1 of 1

Building Octane Machine - Advice

Posted: Fri Aug 19, 2016 6:38 pm
by HyperNerd
Hello,

Mac guy here looking into building a PC workstation specifically for Octane. I'll primarily be using C4D/Octane and building around 4 GPUs. Looking for advice on some configurations I'm considering...

I'm leaning toward this overclocked gaming PC from MAINGEAR with the following stats:
MAINGEAR FORCE X99
• Motherboard: ASUS RAMPAGE V EDITION 10
• Processor: Intel® Core i7 6900K 8-core 3.2GHz/3.7GHz Turbo 20MB L3 Cache
• Memory: 32GB HyperX® PredatorT DDR4- 3000(4x8GB) [QUAD Channel]
Graphics Card: QUAD NVIDIA GeForce GTX 1080 8GB GDDR5x
• GPU Liquid Cooling: Quad Card EK Supremacy - Nickel
• Power Supply: 1500 Watt Corsair® AX1500i 80+ Titanium Modular PSU

Note the liquid-cooled quad GTX 1080's in this i7 machine. Thoughts? I'm quoted around $9500

Also considering a similar build, but with a dual Xeon's instead. The difference being it will not be liquid-cooled. I'm assuming that would make for a hot and loud machine?

As stated, I'm a long-time Mac user, so this is new territory for me. Thank in advance for any input!

Re: Building Octane Machine - Advice

Posted: Fri Aug 19, 2016 9:26 pm
by smicha
4x 1080 on water and much better mobo (4 gpus at x16) fully watercooled withj Aquaero shall be around 6000EUR net ( 0 VAT if you have business). PM me and look at my posts.