OTOY Forums

1. Case - 900D
2. Motherboard - Asus P9X79-E WS
3. CPU - 3930K with EK-Supremacy EVO Elite Edition - Intel 2011.
4. GPUs: 2x TITAN Z with EK acetal nickel waterblocks and EK backplates.
5. PSU: Corsair AX1500i
6. SSD/HDD: 512GB Samsung 850 Pro, Synology NAS...
7. Radiators: 2x Aquacomputer Airplex Modularity Copper 480 with black anodised alloy sides mods.
8. Pumps: 2x D5, Bitspower Black Sparkle D5 Mod kits, D5 MOD TOP V2 EXTREME (Acrylic Version)
9. Reservoir: Bitspower D5 Top Upgrade Kit 250 (Clear Acrylic Cap) with Z-CAP II With G1/4" x 3 (Clear Acrylic Version) and G1/4" Black Sparkle Aqua-Pipe I.
10. Tubing: 16mm acrylic tubing.
11. Fans: 20x NoiseBlocker Pro PL2
12. Sleeved cables...


I am glad to help one of our users PiotrAdamczyk and apply to 2x Titans Z some great watercooling parts, all top notch.

Stay tuned

wooHoo! =) that sounds great!!! looking forward for this conversion! =) curious how far You managed to push those!

I need to take care of this mess...
Even with the spacing between them they reach 85C limit and go down to 700mhz.

Hope to see them at 1200mhz and 40C

considering brutal mess inside I have no surprise the temps are so high & clocker so low..
however Jeroen (a.k.a Rappet) is getting nearly 900+ on air..under load - but his case is very tiny & plenty of airflow =)
so..again..airflow matters =)

it would be interesting to see, I wish You guys hit that 1200+ =) I guess You taking plenty of rad space for that..Bulwerks (Maingear) 4x Titanz build was a bit too squeezed on that matter.. but I believe You Guys are going to play harder! =) this will be intersting!

Hope this is not hard to guess - what radiator will there be inside, Glimpse?

smicha wrote:Hope this is not hard to guess - what radiator will there be inside, Glimpse?

envy You, my guess Aqua Computer - I can guess what fans You Guys are going to use =DDD,
I'm looking one eye into those..to myself. Than pump I've got a while ago is dusting.. =)
(been stopped after I've lost a possibility to get passive rads - soon be time to blow the dust =)

If we're lucky we'll go with modded 2x480 copper Aquacomputer with black anodised alloy sides And 20 be quiet fans inside in push pull.

YeahWoo.. love to see this happen
after seeing this happen...I might try and find me a guy in my country who can watercool my gpu's as well to reconfigure my build one day in future future.. I'll stick to AC for a while.
I'll keep an eye on this thread...
cheers,

smicha wrote:If we're lucky we'll go with modded 2x480 copper Aquacomputer with black anodised alloy sides And 20 be quiet fans inside in push pull.

blew out my, even best hope. Man this should go straight to stratosphere in terms of performance with those Zs =) Technically You could lift up with single 480, but temps would be higher or nice should be way louder..-but with 2 of them =) that is another story!!!

what case You're planing Guys, or is it going to be like external mod? =)

p.s.

rappet wrote: after seeing this happen...I might try and find me a guy in my country who can watercool my gpu's as well to reconfigure my build one day in future future.. I'll stick to AC for a while.

I'm confident You should be able to make this Yourself in an evening or two - the hardest part is all the planing & getting all the right parts =) Once it's figured out (& I'm pretty sure You'd get help on this!) the rest is way enough, just need to put some care into process & that it!

900D, I wish STH10 but maybe in the future...