OTOY Forums

I have 10 GPUs on 16x to 1x PCI powered attachments like this:
and they all work perfectly.

These kind of attachments were very dodgy in my experience:
such extensions worked properly only from one manufacturer, I had to ditch 10 such extensions from other manufacturers because they weren't working properly.


So my conclusion is simple is better !


Interesting clip about why GPUs fail internally:
https://www.youtube.com/watch?v=pRz_CG3DZb4

In my case, the problem occurred.
I used a version 3.00.10.0 was an error to bring up the 60 million poly before rendering.
In previous versions, the problem appeared in a well-used system was quite surprised referred to the situation without any problems.
Connect directly to the motherboard and is not an error has occurred.

I used the cable of the second image

Combined with the system rather than a set speed, PCI-E only a matter of plug-ins are a problem that appears.
Lanes are going to need to replace the system with a lot of systems.


-------------------------------------------------------------------------------------------------------------------------------

BorisGoreta wrote:I have 10 GPUs on 16x to 1x PCI powered attachments like this:

460966520_815.jpg

and they all work perfectly.

These kind of attachments were very dodgy in my experience:

imgres.jpg

such extensions worked properly only from one manufacturer, I had to ditch 10 such extensions from other manufacturers because they weren't working properly.


So my conclusion is simple is better !


Interesting clip about why GPUs fail internally:
https://www.youtube.com/watch?v=pRz_CG3DZb4

Juanjo.. Help! Alpha 10 is no longer working. It brings up license un/pw dialog and my login stuff is not working. Yes, I am using the ones from my license page and not the account un/pw... Need to get to work asap. Zoinks!

*I thought alpha/beta was supposed to work until 15th... then we need to buy 3.0... right?

Edit: Of course, this is f*cking Friday the 13th! I am an otherwise completely non-superstitious dude, but holy crap, I have had some bad F13s... too many.

go to user->Boris->AppData->Roaming->OctaneRender and delete otoy_credentials file

after relaunch you will need to reenter login data

Oh, thanx Boris!

Hmmm.. I see:

data (no extension)
license (no extension)
octane_render_v1_live_account.cfg
preferences_v2 (no extension)
one of those folders that has a string of letters/numbers in curly brackets (with data and preferences_v2 files in it)
localDb folder (empty)


I see no otoy_credentials file

Strange, then it is not the same problem I had, I got an authentication error window but it didn't ask me to enter my credentials.

share the screen

Alpha 10 in LW worked fine yesterday. I have done nothing and certainly not changed anything...

So you enter your credentials but they are not working ?

Send email to support@otoy something, they will answer promptly.

I just downloaded and fired up Standalone Beta 2, and got the same damn thing. OctaneRender Activation and my license un/pw are not working.

Guess I'll try emailing Otoy, but it is Saturday morning there now....