Page 11 of 12

Re: GTX_1080 benchmark

Posted: Sun May 07, 2017 5:56 pm
by uncia
carmichael84 wrote:The 1080ti stock cooler is pretty impressive. I just built a z270 rig with 3 EVGA Founders cards. Total Octane Bench score was 628 with +150 base clock and +500mem.
Even if the benchmark numbers are off, those temps are great. Gotta say, I'm pretty happy.
Hi Man! Can you please test your cards again with this version of bench while Octane team conquers the world and prepairing benchmark ;)
OctaneBench_3.0.6.zip
(52.61 MiB) Downloaded 381 times

Re: GTX_1080 benchmark

Posted: Sun May 07, 2017 9:27 pm
by itou31
Here my result just for fun :
Capture.JPG

Re: GTX_1080 benchmark

Posted: Sun May 07, 2017 11:59 pm
by uncia
Thank you a lot! :D

Re: GTX_1080 benchmark

Posted: Mon May 08, 2017 9:14 am
by Zay
Thanks Uncia.

GTX 980 Ti = 154 (OC 1440 MHZ)
GTX 1080 Ti = 214 (OC 2037 MHZ)

Re: GTX_1080 benchmark

Posted: Mon May 08, 2017 5:37 pm
by uncia
I am getting 105 points score with 1060.
So 1080ti has 3x more cores and is only two times faster than 1060 at same clock speeds.
This is funny :)

Re: GTX_1080 benchmark

Posted: Tue May 09, 2017 4:20 pm
by carmichael84
Just ran the 3.06 bench.

3x 1080ti OC (=150clock / +500 Mem)
Octane_31080ti_002.PNG

3x 1080ti Stock
Octane_31080ti_002_stock.PNG

Then I also ran the bench on my 4x 980ti's OC (+150Clock / +400mem):
980tiHybrid_001.PNG

4x 980ti Stock just for fun:
980tiHybrid_001_stock.PNG

Re: GTX_1080 benchmark

Posted: Tue May 09, 2017 7:06 pm
by carmichael84
To follow up my previous post, I think it's important as so many have said, to not really take the benchmark too literally.

Testing in a real scene, my 4x980ti OC rendered a shot in 5:27

My 3x 1080ti OC rig rendered the same scene in 4:03.

(All in octane for c4d 3.05)

So in Octane Bench, my 980ti's actually out performed my 3 1080ti's when overclocked.

But in real world testing, the 3x 1080ti's were almost 30% faster.

Re: GTX_1080 benchmark

Posted: Wed May 10, 2017 12:42 pm
by uncia
Render it with octane for c4d 3.06 version please ;)

Re: GTX_1080 benchmark

Posted: Mon May 15, 2017 12:50 pm
by tim_grove
Hi Guys,

I have an Msi Corsair GTX1080 Seahawk (AIO Watercooled)

I see my temp hovering between 49-50C while rendering in Octane. Keeping in mind i generally render animation for sometimes 24 hours at a time, is it safe/worth it to overclock this card?

Re: GTX_1080 benchmark

Posted: Mon May 15, 2017 1:20 pm
by FrankPooleFloating
Actually, I consider that pretty decent temps. I have never come across a definitive max temp for hybrids, but the thing to keep in mind is that AIO pumps' max temp must be far below what GPU cores can handle. And since the pump sits right on top of core, they are definitely getting some serious heat. I have to think that if a pump started approaching 83° (181.4° F) it would not be good, at all... My top (display) gets up to 63° during full blast rendering, with no overclocking, and #2 gets to 60°. So for me personally, I dare not push the envelope and/or my luck...

If anyone knows what is very safe max for hybrids, please advise. Though I would prolly not OC even if someone said 75°...