Re: OctaneRender® for ArchiCAD 2.24 [TEST]
Posted: Sun Sep 06, 2015 11:13 pm
That is the plan - but after it's be tested in the ArchiCAD plugin.Wonderful! I want it in the Revit plugin too
Paul
Paul
OTOY Forums
Community Forums for OTOY Customers
https://render.otoy.com/forum/
OctaneRender® for ArchiCAD 3.03.3 [OBSOLETE]
Page 11 of 18
Paul
Re: OctaneRender® for ArchiCAD 2.24.1 [TEST]
Posted: Thu Sep 10, 2015 10:59 pm
I have refreshed the installers at the top of this thread with:
2.24.1.53
- For OCS/ORBX proxies source files, if a single mesh node cannot be found, the first "Geometry out" node will be used, and if that is not found whatever is plugged into the first rendertarget "mesh" pin will be used as proxy
- You can now edit the nodes and materials from OCS/ORBX proxies via the Edit button. This can only be done whilst the Viewport is open. IMPORTANT: This is experimental functionality, so use with caution. Make a backup of pla/pln files prior to using this function.
- Importing rendertargets and setting the rendertarget to default now correctly re-populates the Render Pass combo box
Paul
2.24.1.53
- For OCS/ORBX proxies source files, if a single mesh node cannot be found, the first "Geometry out" node will be used, and if that is not found whatever is plugged into the first rendertarget "mesh" pin will be used as proxy
- You can now edit the nodes and materials from OCS/ORBX proxies via the Edit button. This can only be done whilst the Viewport is open. IMPORTANT: This is experimental functionality, so use with caution. Make a backup of pla/pln files prior to using this function.
- Importing rendertargets and setting the rendertarget to default now correctly re-populates the Render Pass combo box
Paul
Re: OctaneRender® for ArchiCAD 2.24.1 [TEST]
Posted: Fri Sep 11, 2015 10:09 am
There was a problem with the installers for 2.24.1.53 which I have now fixed, and the installers have been re-uploaded. Pls re-download the installers and re-install if you had previously downloaded this release.2.24.1.53
- For OCS/ORBX proxies source files, if a single mesh node cannot be found, the first "Geometry out" node will be used, and if that is not found whatever is plugged into the first rendertarget "mesh" pin will be used as proxy
- You can now edit the nodes and materials from OCS/ORBX proxies via the Edit button. This can only be done whilst the Viewport is open. IMPORTANT: This is experimental functionality, so use with caution. Make a backup of pla/pln files prior to using this function.
- Importing rendertargets and setting the rendertarget to default now correctly re-populates the Render Pass combo box
Paul
Re: OctaneRender® for ArchiCAD 2.24.2 [TEST]
Posted: Mon Oct 12, 2015 6:46 am
I have refreshed the installers at the top of this thread with:
2.24.2.54
- Compiled with Octane 2.24.2
Paul
2.24.2.54
- Compiled with Octane 2.24.2
Paul
Re: OctaneRender® for ArchiCAD 2.24.2 [TEST]
Posted: Mon Oct 12, 2015 7:12 am
Thanx Paul
Re: OctaneRender® for ArchiCAD 2.24.2 [TEST]
Posted: Mon Oct 12, 2015 7:49 pm
Hi Paul,
just installed 2.24.2.54 and got a 'Missing Add-on' error in Archicad
After reinstalling some of the older versions, everything is OK again - any idea?
Greets,
Artur
just installed 2.24.2.54 and got a 'Missing Add-on' error in Archicad
After reinstalling some of the older versions, everything is OK again - any idea?
Greets,
Artur
Re: OctaneRender® for ArchiCAD 2.24.2 [TEST]
Posted: Mon Oct 12, 2015 9:52 pm
Hi Artur - can you pls reboot and try reinstalling the latest version. If you still get the error, can you post a screenshot of the Options->Addin Manager panel, with the missing addon selected.just installed 2.24.2.54 and got a 'Missing Add-on' error in Archicad
Thanks
Paul
Re: OctaneRender® for ArchiCAD 2.24.2 [TEST]
Posted: Mon Oct 12, 2015 9:53 pm
Hi Paul,
same problem for me too with the AC19 plug-in.
I've gone back to the previous build for the moment.
Edit - If you look at the Add-on manager it reports that the Plug-in is "out of Date"
Cheers, Dan.
same problem for me too with the AC19 plug-in.
I've gone back to the previous build for the moment.
Edit - If you look at the Add-on manager it reports that the Plug-in is "out of Date"
Cheers, Dan.
Re: OctaneRender® for ArchiCAD 2.24.2 [TEST]
Posted: Tue Oct 13, 2015 12:50 am
I have refreshed the installer at the top of this thread with:
2.24.2.55
- Fixed issue where plugin would not load, reporting "plugin out of date"
- Fixed crash when generating a grass ABC file for an object which was not previously a proxy
* NOTE: In AC19, when generating grass, the Mesh object that the grass will be placed on will be listed in the Mesh combobox by it's ID - which by default is blank. So enter a Mesh ID to name each Mesh, so that you can select the appropriate mesh to plae the grass on.
Thanks
Paul
2.24.2.55
- Fixed issue where plugin would not load, reporting "plugin out of date"
- Fixed crash when generating a grass ABC file for an object which was not previously a proxy
* NOTE: In AC19, when generating grass, the Mesh object that the grass will be placed on will be listed in the Mesh combobox by it's ID - which by default is blank. So enter a Mesh ID to name each Mesh, so that you can select the appropriate mesh to plae the grass on.
Thanks
Paul
Re: OctaneRender® for ArchiCAD 2.24.2 [TEST]
Posted: Tue Oct 13, 2015 3:19 am
can we generate grass scatter files from within the Revit plugin?face_off wrote:I have refreshed the installer at the top of this thread with:
2.24.2.55
- Fixed issue where plugin would not load, reporting "plugin out of date"
- Fixed crash when generating a grass ABC file for an object which was not previously a proxy
* NOTE: In AC19, when generating grass, the Mesh object that the grass will be placed on will be listed in the Mesh combobox by it's ID - which by default is blank. So enter a Mesh ID to name each Mesh, so that you can select the appropriate mesh to plae the grass on.
Thanks
Paul