OTOY Forums

I also have this problem. Standalone.

2 Titan X in SLI mode and without switching to single cards and changing priorities or off doesn't help.

Driver 364.72 on a 5960X with 64 RAM on Windows 10. Latest Alpha build 8 I tried. Happens on Catmull Clarked, raw, or displaced geometry. It also leaves the card in a funny state, where it needs a total switch off.

It fails sometimes earlier < 40 Million or it renders but ultimately fails. Cards are not overheating, I checked and checked with various hardware monitoring programs.

Hi Gineus,
You know tgat SLI should be disabled when working with Octane, right?
Cheers,
Seeker

Yes SLI should be OFF for Octane. But on the original topic question still stands WHY do we have that limit 39-40Mil polys limit. Wasn't one of 3.0 features/pillars been to have "unlimited" polycount ? Can we get Otoy guys to clarify this issue.

Thanks

Lewis wrote:Yes SLI should be OFF for Octane. But on the original topic question still stands WHY do we have that limit 39-40Mil polys limit. Wasn't one of 3.0 features/pillars been to have "unlimited" polycount ? Can we get Otoy guys to clarify this issue.

Thanks

Here is a response from Abstrax on the issue.

Best,
Seeker