New Year's open themed still image competition (CLOSED)

Forums: New Year's open themed still image competition (CLOSED)
A forum which hosts Octane Render Artwork Competitions
Forum rules
For new users: this forum is moderated. Your first post will appear only after it has been reviewed by a moderator, so it will not show up immediately.
This is necessary to avoid this forum being flooded by spam.

Re: New Year's open themed still image competition (OPEN)

Postby marco diulgheroff » Tue Feb 01, 2011 8:56 pm

marco diulgheroff Tue Feb 01, 2011 8:56 pm
Hi, here is a new shot of my simple project "To take flight" ( viewtopic.php?f=16&t=4701&start=240 and viewtopic.php?f=16&t=4701&start=250 ), the third one, and I think it could be the last too, I don't want to bore you anymore with this subject, honestly. No Vue's background, but just an clear and sunny Octane's daylight illumination, a bit better sea and some little improvement on the boat's textures..
I don't know, maybe I'm going to start a new project on these days, I'll be still in time I think! :D
Bye
Attachments
TTF_OctaneScrn_06_01.jpg
ToTakeFlight_4096x2550c.jpg
Last edited by marco diulgheroff on Tue Feb 01, 2011 9:53 pm, edited 1 time in total.
User avatar
marco diulgheroff
Licensed Customer
Licensed Customer
 
Posts: 20
Joined: Mon May 31, 2010 10:24 pm
Location: Turin, Italy

Re: New Year's open themed still image competition (OPEN)

Postby Senshi » Tue Feb 01, 2011 9:45 pm

Senshi Tue Feb 01, 2011 9:45 pm
My sincere apologies Mlody, I shouldn't have assumed things and put words/ thoughts into your mouth. I got a bit frustrated at everyone's complaints and vented a bit. I'm sorry about that.
Senshi
Licensed Customer
Licensed Customer
 
Posts: 19
Joined: Thu Jan 28, 2010 3:16 pm

Re: New Year's open themed still image competition (OPEN)

Postby ROUBAL » Tue Feb 01, 2011 10:51 pm

ROUBAL Tue Feb 01, 2011 10:51 pm
Nice view Marco !

I like large outside scenes, and I like airplanes. One of my preferred (I will model it for my project in a close future I think) is the De Havilland Beaver DHC-2 !
French Blender user - CPU : intel Quad QX9650 at 3GHz - 8GB of RAM - Windows 7 Pro 64 bits. Display GPU : GeForce GTX 480 (2 Samsung 2443BW-1920x1600 monitors). External GPUs : two EVGA GTX 580 3GB in a Cubix GPU-Xpander Pro 2. NVidia Driver : 368.22.
User avatar
ROUBAL
Licensed Customer
Licensed Customer
 
Posts: 2199
Joined: Mon Jan 25, 2010 5:25 pm
Location: FRANCE

Re: New Year's open themed still image competition (OPEN)

Postby marco diulgheroff » Tue Feb 01, 2011 11:13 pm

marco diulgheroff Tue Feb 01, 2011 11:13 pm
@ROUBAL
Thanks a lot ROUBAL, I'm proud of your comment, really, 'couse you are a master for me and I admired your stunning work for lots of minutes. Very nice plane the De Havilland Beaver DHC-2 and surely more modern than "my" Piper j3 Cub (very basic plane!) :D
Best regards and good luck for this competition, you are within my fovourite list here! ;)
Last edited by marco diulgheroff on Wed Feb 02, 2011 2:04 am, edited 2 times in total.
User avatar
marco diulgheroff
Licensed Customer
Licensed Customer
 
Posts: 20
Joined: Mon May 31, 2010 10:24 pm
Location: Turin, Italy

Re: New Year's open themed still image competition (OPEN)

Postby ROUBAL » Wed Feb 02, 2011 12:31 am

ROUBAL Wed Feb 02, 2011 12:31 am
Thanks Marco ! :)
French Blender user - CPU : intel Quad QX9650 at 3GHz - 8GB of RAM - Windows 7 Pro 64 bits. Display GPU : GeForce GTX 480 (2 Samsung 2443BW-1920x1600 monitors). External GPUs : two EVGA GTX 580 3GB in a Cubix GPU-Xpander Pro 2. NVidia Driver : 368.22.
User avatar
ROUBAL
Licensed Customer
Licensed Customer
 
Posts: 2199
Joined: Mon Jan 25, 2010 5:25 pm
Location: FRANCE

Re: New Year's open themed still image competition (OPEN)

Postby okichkoatl » Wed Feb 02, 2011 1:01 am

okichkoatl Wed Feb 02, 2011 1:01 am
Hi guys, well. just to keep playing with octane, i' post this one.. ketzalkoatl white & black that represent ketzalkoatl and Tezkatlipopoka the twin gods. flying upon The actual mexico city.

i hope you like it.

Oscar Paz.
Attachments
screenshot_new.jpg
kaanes_Render4.jpg
kaanes_Render2.jpg
kaanes_Render1.jpg
okichkoatl
Licensed Customer
Licensed Customer
 
Posts: 11
Joined: Thu Dec 30, 2010 9:06 am

Re: New Year's open themed still image competition (OPEN)

Postby marco diulgheroff » Wed Feb 02, 2011 2:37 am

marco diulgheroff Wed Feb 02, 2011 2:37 am
@ okichkoatl
If I'm not mistaken, according to the legend, Quetzalkòatl (the plumed snake, lord of the light) should have come back in 2009 and Tezkatlipoca (lord of the night) just one year before, in 2008. Surely you've seen them! :D
Nice modelling!

@ROUBAL
Please, would you tell me more about the biplane you used in your scenes here? Wich model is it? Did you just model it with Blender? Wonderfull effect on the propeller, how did you obtain it? Did you use a motion blur method? Thanks!
Best regards
User avatar
marco diulgheroff
Licensed Customer
Licensed Customer
 
Posts: 20
Joined: Mon May 31, 2010 10:24 pm
Location: Turin, Italy

Re: New Year's open themed still image competition (OPEN)

Postby okichkoatl » Wed Feb 02, 2011 4:34 am

okichkoatl Wed Feb 02, 2011 4:34 am
marco diulgheroff wrote:@ okichkoatl
If I'm not mistaken, according to the legend, Quetzalkòatl (the plumed snake, lord of the light) should have come back in 2009 and Tezkatlipoca (lord of the night) just one year before, in 2008. Surely you've seen them! :D
Nice modelling!


i have never hear about that legent. there is a lot of information about ketzalkoatl (i write it like that because in nahuatl should be write with k) but the leyend i know of ketzalkoatl is similar to tha story of christ of course with many difference but, hi dissapear, because he was tempted, and he was defeated by his brother tezkatlipoka. but hi promes hi will return. but i didnt knon nothing about return in 2008 or 2009. other thing that i know is that ketzalkoatl is Venus. is like a bright star in the morning and in the evening. anyway. there is a lot a lot a lot of info about tolteca culture.

i'm glad you like the modeling. i was planning to retouchit with zbrush but i dont know how to use it well yet. and i havent used Sculpt in blender.

Saludos.
Oscar Paz.
okichkoatl
Licensed Customer
Licensed Customer
 
Posts: 11
Joined: Thu Dec 30, 2010 9:06 am

Re: New Year's open themed still image competition (OPEN)

Postby yoyoz » Wed Feb 02, 2011 5:20 am

yoyoz Wed Feb 02, 2011 5:20 am
marco diulgheroff wrote:@ROUBAL
Please, would you tell me more about the biplane you used in your scenes here? Wich model is it? Did you just model it with Blender? Wonderfull effect on the propeller, how did you obtain it? Did you use a motion blur method? Thanks!
Best regards


I'm not Roubal but I can answer this one ;) : this is a Stampe, a very famous training and aerobatics Belgian plane. His model is so nice he probably modeled it himself :lol:

The Piper J3 may not be modern, but I have some hours on my log book flying a PA-19 (F-BOML)which is roughly the same as the J3 with 90hp engine, and I can tell you that this is a wonderfull machine to fly!
Desktop: Ubuntu 13.04 x64 - i7-3770K @ 3.5GHz - 32GB DDR3 - GTX670 2048MB
Laptop: Linux Mint 11 x64 - i7-2860QM @ 2.5GHz - 16GB DDR3 - Quadro 3000M 2GB
Software: NVidia 319.12 - Cuda 4.2.9 - Blender 2.66a
User avatar
yoyoz
Licensed Customer
Licensed Customer
 
Posts: 451
Joined: Sat Dec 25, 2010 9:59 am
Location: Belgium

Re: New Year's open themed still image competition (OPEN)

Postby matej » Wed Feb 02, 2011 9:53 am

matej Wed Feb 02, 2011 9:53 am
Can somebody in charge please answer this doubts I have:

* Are we allowed to composite together two raw Octane renders, which are part of the same scene (the reason is optimising the amount of exported geometry)

* Are we allowed to composite in a background image. The rules seems to not allow this, but a lot of people did it. Now, I don't know if they did it in an image manipulating software or they inserted a textured plane in the scene, but the latter is kinda counter-intuitive, since this competition is also about promoting 2.4 features, one of which is saving with alpha for compositing purposes.
SW: Octane 3.05 | Linux Mint 18.1 64bit | Blender 2.78 HW: EVGA GTX 1070 | i5 2500K | 16GB RAM Drivers: 375.26
cgmo.net
User avatar
matej
Licensed Customer
Licensed Customer
 
Posts: 2083
Joined: Fri Jun 25, 2010 7:54 pm
Location: Slovenia
PreviousNext

Return to Competitions


Who is online

Users browsing this forum: No registered users and 7 guests

Thu Mar 28, 2024 2:26 pm [ UTC ]