OcDS 1.2.120.34xx - BUG REPORTS

Forums: OcDS 1.2.120.34xx - BUG REPORTS
DAZ Studio Integrated Plugin (Integrated Plugin maintained by OTOY)

Moderator: BK

Forum rules
Please keep character renders sensibly modest, please do not post sexually explicit scenes of characters.

Re: OcDS 1.2.120.34xx - BUG REPORTS

Postby SimonJM » Tue May 19, 2015 3:05 pm

SimonJM Tue May 19, 2015 3:05 pm
Raised a bug with DAZ over some (not all) Dynamic Clothing items causing Daz Studio to crash when they are loaded.
A bit of investigation showed this ONLY happened with OcDS active, so I have asked them to close the bug report.
SimonJM
Licensed Customer
Licensed Customer
 
Posts: 198
Joined: Tue Mar 19, 2013 12:28 am

Re: OcDS 1.2.120.34xx - BUG REPORTS

Postby Snowball » Sat Jul 04, 2015 6:28 pm

Snowball Sat Jul 04, 2015 6:28 pm
Hi. I have only just found out about the problems with 1.2.120.3430 not loading the octane materials from Daz scenes saved with the previous version. I have around a year and a half of work saved with the previous plug in. 280 scenes. A lot of it is Daz content but I built a fair bit in Hexagon and made Octane materials - I also set up a lot of lights using blackbody. I updated only recently (I updated Daz, Octane itself and the plug-in) - everything seems so much better so well done there. However, I have my 280 scenes that won't load the octane material settings I used. How do I fix this? There seems to be talk of a version 1.5 that will fix it. Is this happeneing? The only other thing I can think of is to roll back to my previous plug-in version - which I believe was 2313. I need to access all the embedded data in those 280 scenes so that they render properly with the original octane material settings.

Thanks in advance
i7 3770
G1 Sniper 3
32gb G.Skill Dual Channel
GTX Titan
CM Silent Pro Gold 1000w
Samsung 840 Pro 256gb
Samsung F3 Spinpoint 1tb
Thermaltake Level 10 GT

Windows 7 Pro 64
Snowball
Licensed Customer
Licensed Customer
 
Posts: 3
Joined: Sun May 19, 2013 5:34 pm
Location: Cambridgeshire, UK

Re: OcDS 1.2.120.34xx - BUG REPORTS

Postby DrHemulen » Mon Aug 10, 2015 7:47 pm

DrHemulen Mon Aug 10, 2015 7:47 pm
Edit: Wrong Thread.
GTX 780, 6 gigs of VRAM - Win 7 Home Premium 64 bits
User avatar
DrHemulen
Licensed Customer
Licensed Customer
 
Posts: 317
Joined: Thu Dec 26, 2013 7:09 pm

Re: OcDS 1.2.120.34xx - BUG REPORTS

Postby Jools » Sat Sep 19, 2015 1:11 pm

Jools Sat Sep 19, 2015 1:11 pm
I recently switched to a new pc system: Asus Z170 Pro gaming mobo, Intel skylake I5 6600k processor, 16GB DDR4 ram and a Evga GTX980 TI 6GB graphics card, running on 64bit Windows10. With the newly installed DazStudio 4.8 I have the following issues:

Octane Render does connect to Octane Live and the activation manager reports the plug-in is activated. The system tab however shows no activation and no connection.
The system tab reports it does not recognize the graphics card, although it is listed under GPU configuration and I can check it. Upon DS restart it will be unchecked again.
The viewport will open, but Octane does not render.
Octane Standalone is activated and working properly and both licenses show as activated in my User Account.

Would appreciate some help with this.
Jools
Licensed Customer
Licensed Customer
 
Posts: 24
Joined: Sun Sep 01, 2013 11:55 am

Re: OcDS 1.2.120.34xx - BUG REPORTS

Postby birdovous » Sat Sep 19, 2015 3:12 pm

birdovous Sat Sep 19, 2015 3:12 pm
Jools wrote:I recently switched to a new pc system: Asus Z170 Pro gaming mobo, Intel skylake I5 6600k processor, 16GB DDR4 ram and a Evga GTX980 TI 6GB graphics card, running on 64bit Windows10. With the newly installed DazStudio 4.8 I have the following issues:

Octane Render does connect to Octane Live and the activation manager reports the plug-in is activated. The system tab however shows no activation and no connection.
The system tab reports it does not recognize the graphics card, although it is listed under GPU configuration and I can check it. Upon DS restart it will be unchecked again.
The viewport will open, but Octane does not render.
Octane Standalone is activated and working properly and both licenses show as activated in my User Account.

Would appreciate some help with this.

Yesterday OTOY was doing maintenance on their OctaneLive servers so the reason why it did not connect in the system tab was caused by this (today it is already working fine).

If you are really using Octane plugin for DAZ version 1.2 then the GTX980 is NOT supported by this version of the plugin and you will need to upgrade to the version 2 of the DAZ Octane Plugin in order to use it with GTX980.

That is also the reason why you can see the GTX980 in the Octane standalone, but not in the version 1.2 of the Octane plugin for DAZ Studio.

I did have a similar problem when I upgraded from GTX780 Ti to Titan X.
Birdovous
Master: Core i7 2600K, 32GB RAM, 2x EVGA GTX Titan X (SC)
Slave 1: Core i5 4460, 16GB RAM, 2x EVGA GTX 1080 Ti SC2
Slave 2: Core i7 9700K, 64GB RAM, 2x ASUS RTX 2080 Ti
User avatar
birdovous
Licensed Customer
Licensed Customer
 
Posts: 155
Joined: Tue Jul 23, 2013 5:33 pm

Re: OcDS 1.2.120.34xx - BUG REPORTS

Postby Jools » Sat Sep 19, 2015 5:05 pm

Jools Sat Sep 19, 2015 5:05 pm
birdovous wrote:Yesterday OTOY was doing maintenance on their OctaneLive servers so the reason why it did not connect in the system tab was caused by this (today it is already working fine).

If you are really using Octane plugin for DAZ version 1.2 then the GTX980 is NOT supported by this version of the plugin and you will need to upgrade to the version 2 of the DAZ Octane Plugin in order to use it with GTX980.

That is also the reason why you can see the GTX980 in the Octane standalone, but not in the version 1.2 of the Octane plugin for DAZ Studio.

I did have a similar problem when I upgraded from GTX780 Ti to Titan X.


Thank you for saving my weekend. I downloaded from the account, which still has 1.2 as the last version. I'm up and running now with 2. :)
Jools
Licensed Customer
Licensed Customer
 
Posts: 24
Joined: Sun Sep 01, 2013 11:55 am

Re: OcDS 1.2.120.34xx - BUG REPORTS

Postby face_off » Sat Nov 21, 2015 10:06 pm

face_off Sat Nov 21, 2015 10:06 pm
OctaneRender for DazStudio versions prior to Octane 2 are not longer supported. So I am "unstickying" this thread.

Thanks

Paul
Win7/Win10/Mavericks/Mint 17 - GTX550Ti/GT640M
Octane Plugin Support : Poser, ArchiCAD, Revit, Inventor, AutoCAD, Rhino, Modo, Nuke
Pls read before submitting a support question
User avatar
face_off
Octane Plugin Developer
Octane Plugin Developer
 
Posts: 15471
Joined: Fri May 25, 2012 10:52 am
Location: Adelaide, Australia
Previous

Return to DAZ Studio


Who is online

Users browsing this forum: No registered users and 6 guests

Thu Mar 28, 2024 2:18 pm [ UTC ]